Export limit exceeded: 54465 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54465 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43077 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Fix minimum RX size check for decryption The check for the minimum receive buffer size did not take the tag size into account during decryption. Fix this by adding the required extra length. | ||||
| CVE-2026-43024 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue. | ||||
| CVE-2026-43020 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state. | ||||
| CVE-2026-43017 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request. | ||||
| CVE-2026-31778 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix stack out-of-bounds read in init_card The loop creates a whitespace-stripped copy of the card shortname where `len < sizeof(card->id)` is used for the bounds check. Since sizeof(card->id) is 16 and the local id buffer is also 16 bytes, writing 16 non-space characters fills the entire buffer, overwriting the terminating nullbyte. When this non-null-terminated string is later passed to snd_card_set_id() -> copy_valid_id_string(), the function scans forward with `while (*nid && ...)` and reads past the end of the stack buffer, reading the contents of the stack. A USB device with a product name containing many non-ASCII, non-space characters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718 The off-by-one has been present since commit bafeee5b1f8d ("ALSA: snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1), which first introduced this whitespace-stripping loop. The original code never accounted for the null terminator when bounding the copy. Fix this by changing the loop bound to `sizeof(card->id) - 1`, ensuring at least one byte remains as the null terminator. | ||||
| CVE-2026-31776 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix missing SPDIFI1 index handling SPDIF1 DAIO type isn't properly handled in daio_device_index() for hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds array access. Follow the hw20k1 pattern and return the proper index for this type, too. | ||||
| CVE-2026-31775 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization The recent refactoring of xfi driver changed the assignment of atc->daios[] at atc_get_resources(); now it loops over all enum DAIOTYP entries while it looped formerly only a part of them. The problem is that the last entry, SPDIF1, is a special type that is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO), and there is no corresponding definition for hw20k2. Due to the lack of the info, it caused a kernel crash on hw20k2, which was already worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing SPDIFI1 index handling"). This patch addresses the root cause of the regression above properly, simply by skipping the incorrect SPDIF1 type in the parser loop. For making the change clearer, the code is slightly arranged, too. | ||||
| CVE-2026-31765 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with 4K pages, both values match (8KB), so allocation and reserved space are consistent. However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB, while the reserved trap area remains 8KB. This mismatch causes the kernel to crash when running rocminfo or rccl unit tests. Kernel attempted to read user page (2) - exploit attempt? (uid: 1001) BUG: Kernel NULL pointer dereference on read at 0x00000002 Faulting instruction address: 0xc0000000002c8a64 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E 6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY Tainted: [E]=UNSIGNED_MODULE Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730 REGS: c0000001e0957580 TRAP: 0300 Tainted: G E MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268 XER: 00000036 CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000 IRQMASK: 1 GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100 c00000013d814540 GPR04: 0000000000000002 c00000013d814550 0000000000000045 0000000000000000 GPR08: c00000013444d000 c00000013d814538 c00000013d814538 0000000084002268 GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff 0000000000020000 GPR16: 0000000000000000 0000000000000002 c00000015f653000 0000000000000000 GPR20: c000000138662400 c00000013d814540 0000000000000000 c00000013d814500 GPR24: 0000000000000000 0000000000000002 c0000001e0957888 c0000001e0957878 GPR28: c00000013d814548 0000000000000000 c00000013d814540 c0000001e0957888 NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0 LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00 Call Trace: 0xc0000001e0957890 (unreliable) __mutex_lock.constprop.0+0x58/0xd00 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu] kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu] kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu] kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu] kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu] kfd_ioctl+0x514/0x670 [amdgpu] sys_ioctl+0x134/0x180 system_call_exception+0x114/0x300 system_call_vectored_common+0x15c/0x2ec This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve 64 KB for the trap in the address space, but only allocate 8 KB within it. With this approach, the allocation size never exceeds the reserved area. (cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) | ||||
| CVE-2026-31759 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface(). | ||||
| CVE-2026-31738 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | ||||
| CVE-2026-31729 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further. | ||||
| CVE-2026-31696 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing validation of ticket length in non-XDR key preparsing In rxrpc_preparse(), there are two paths for parsing key payloads: the XDR path (for large payloads) and the non-XDR path (for payloads <= 28 bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR path fails to do so. This allows an unprivileged user to provide a very large ticket length. When this key is later read via rxrpc_read(), the total token size (toksize) calculation results in a value that exceeds AFSTOKEN_LENGTH_MAX, triggering a WARN_ON(). [ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc] Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse() to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX, bringing it into parity with the XDR parsing logic. | ||||
| CVE-2026-31684 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_csum: validate nested VLAN headers tcf_csum_act() walks nested VLAN headers directly from skb->data when an skb still carries in-payload VLAN tags. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants. Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and pulling each nested VLAN header. If the header still is not fully available, drop the packet through the existing error path. | ||||
| CVE-2026-31681 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_multiport: validate range encoding in checkentry ports_match_v1() treats any non-zero pflags entry as the start of a port range and unconditionally consumes the next ports[] element as the range end. The checkentry path currently validates protocol, flags and count, but it does not validate the range encoding itself. As a result, malformed rules can mark the last slot as a range start or place two range starts back to back, leaving ports_match_v1() to step past the last valid ports[] element while interpreting the rule. Reject malformed multiport v1 rules in checkentry by validating that each range start has a following element and that the following element is not itself marked as another range start. | ||||
| CVE-2026-31624 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: clamp report_size in s32ton() to avoid undefined shift s32ton() shifts by n-1 where n is the field's report_size, a value that comes directly from a HID device. The HID parser bounds report_size only to <= 256, so a broken HID device can supply a report descriptor with a wide field that triggers shift exponents up to 256 on a 32-bit type when an output report is built via hid_output_field() or hid_set_field(). Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in hid_report_raw_event") added the same n > 32 clamp to the function snto32(), but s32ton() was never given the same fix as I guess syzbot hadn't figured out how to fuzz a device the same way. Fix this up by just clamping the max value of n, just like snto32() does. | ||||
| CVE-2026-31619 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: fireworks: bound device-supplied status before string array lookup The status field in an EFW response is a 32-bit value supplied by the firewire device. efr_status_names[] has 17 entries so a status value outside that range goes off into the weeds when looking at the %s value. Even worse, the status could return EFR_STATUS_INCOMPLETE which is 0x80000000, and is obviously not in that array of potential strings. Fix this up by properly bounding the index against the array size and printing "unknown" if it's not recognized. | ||||
| CVE-2026-31614 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix off-by-8 bounds check in check_wsl_eas() The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA name and value, but ea_data sits at offset sizeof(struct smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp() later reads ea->ea_data[0..nlen-1] and the value bytes follow at ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1 + vlen. Isn't pointer math fun? The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the 8-byte header is in bounds, but since the last EA is placed within 8 bytes of the end of the response, the name and value bytes are read past the end of iov. Fix this mess all up by using ea->ea_data as the base for the bounds check. An "untrusted" server can use this to leak up to 8 bytes of kernel heap into the EA name comparison and influence which WSL xattr the data is interpreted as. | ||||
| CVE-2026-31590 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION Drop the WARN in sev_pin_memory() on npages overflowing an int, as the WARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range); Note, the checks in sev_mem_enc_register_region() that presumably exist to verify the incoming address+size are completely worthless, as both "addr" and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater than ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL; Opportunistically add a comment to explain why the code calculates the number of pages the "hard" way, e.g. instead of just shifting @ulen. | ||||
| CVE-2026-104040 | 2 Redhat, Sssd | 3 Enterprise Linux, Openshift Container Platform, Sssd | 2026-11-06 | 4.4 Medium |
| Red Hat Product Security has been notified that this CVE is a duplicated of CVE-2026-104047 | ||||
| CVE-2026-80303 | 2026-11-06 | N/A | ||
| An integer underflow vulnerability in the Avast Windows Filtering Platform (WFP) stream parser on Windows allows denial of service by causing a system crash. The WFP callout driver processes network stream data and computes length values for packet fragment reassembly. The length calculation does not properly validate input stream sizes against expected boundaries. When processing specially crafted input, the length computation underflows, resulting in allocation or buffer access with an extremely large wrapped-around size value. The underflow can be triggered remotely via network traffic destined for the filtered port, or locally via crafted data provided to the filtering interface. The resulting memory allocation failure or out-of-bounds access causes a kernel panic and system crash. | ||||