Export limit exceeded: 21641 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 54489 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54489 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80545 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB length and overflow checks The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Missing minimum size validation: The ep11_cprb structure and subsequent payload fields (pld_tag, pld_lenfmt) are copied from userspace without verifying sufficient buffer length. 2. Arithmetic overflow in length calculations: CEIL4 alignment could overflow, bypassing size checks and enabling buffer overflows. 3. The payload is asn1 encoded but the function just uses a simple c struct overlay to access some fields of the payload. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, and validating minimum request size and minimum reply size before copying from userspace. Do a very simple asn1 parsing of the payload up to the function value field. | ||||
| CVE-2026-74336 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | ||||
| CVE-2026-72345 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | ||||
| CVE-2026-84420 | 2026-10-15 | N/A | ||
| Out-of-bounds read vulnerability in Citirx Citrix Workspace app for Windows. This issue affects Citrix Workspace app for Windows: before 2603.20 CR, before LTSR 2607, and before LTSR 2507 CU3. | ||||
| CVE-2026-77902 | 1 Microsoft | 8 365 Apps, Microsoft 365, Microsoft Office 365 For Mac and 5 more | 2026-10-15 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-2950 | 1 Lodash | 4 Lodash, Lodash-amd, Lodash-es and 1 more | 2026-10-15 | 6.5 Medium |
| The _.unset and _.omit functions in Lodash are vulnerable to prototype pollution. The fix for CVE-2025-13465 only guards against string key members, so an attacker can bypass the check by passing array-wrapped path segments. This allows deletion of properties from built-in prototypes such as Object.prototype, Number.prototype, and String.prototype. The issue permits deletion of prototype properties but does not allow overwriting their original behavior. The issue is patched from 4.18.0 to 4.18.1 depending on the package: lodash, lodash-es, and lodash-amd in 4.18.1, and the standalone lodash.unset and lodash.omit packages in 4.18.0. | ||||
| CVE-2025-13465 | 1 Lodash | 1 Lodash | 2026-10-15 | 5.3 Medium |
| The _.unset and _.omit functions in Lodash are vulnerable to prototype pollution. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes. The issue permits deletion of properties but does not allow overwriting their original behavior. The issue is patched from 4.17.23 to 4.18.0 depending on the package: lodash, lodash-es, and lodash-amd in 4.17.23, and the standalone lodash.unset and lodash.omit packages in 4.18.0. | ||||
| CVE-2026-108906 | 1 Netcore | 1 Nr268 | 2026-10-15 | 7.2 High |
| A vulnerability has been found in Netcore NR268 1.7.121109. This affects the function filter_arp_put_file_cgi of the file /router/filter_arp_put_file.cgi. The manipulation of the argument put_file leads to out-of-bounds read. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-110597 | 1 Tinyexr Project | 1 Tinyexr | 2026-10-15 | 6.1 Medium |
| Tinyexr through 3.2.0 contains a heap out-of-bounds read vulnerability in ParseEXRMultipartHeaderFromMemory() that allows attackers to read beyond buffers due to a stale remaining-size value. Attackers can supply a crafted multi-part EXR file whose later part headers bypass ReadAttribute() bounds checks, crashing applications or leaking adjacent heap memory into attribute values. | ||||
| CVE-2026-96940 | 1 Microsoft | 9 Exchange Server, Exchange Server 2016, Exchange Server 2019 and 6 more | 2026-10-15 | 8.8 High |
| Weak authentication in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-103059 | 1 Gitea | 1 Gitea | 2026-10-15 | 9.1 Critical |
| When Gitea's built-in SSH server is enabled (`START_SSH_SERVER = true`), the presented public key was looked up with an SQL `LIKE` comparison of its encoded content, which is case-insensitive on some databases, including the default SQLite. An attacker who can construct a case variant of another user's registered RSA public key for which they can derive the private key could have that key matched to the victim's account and authenticate over SSH as that user. Keys are now looked up by fingerprint. | ||||
| CVE-2026-53254 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. | ||||
| CVE-2026-53223 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership. | ||||
| CVE-2026-53198 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on conn->async_requests via setup_async_work(), with cancel_fn = smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock. When the request is cancelled, the worker frees the file_lock with locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never reaches release_async_work() -- the only site that unlinks the work from conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays matchable on async_requests with a live cancel_fn pointing at the freed file_lock, until connection teardown finally runs release_async_work(). smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192 Reproduced on mainline with KASAN by an authenticated SMB client. Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback cannot be fired a second time. | ||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | ||||
| CVE-2026-46307 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath5k: do not access array OOB Vincent reports: > The ath5k driver seems to do an array-index-out-of-bounds access as > shown by the UBSAN kernel message: > UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20 > index 4 is out of range for type 'ieee80211_tx_rate [4]' > ... > Call Trace: > <TASK> > dump_stack_lvl+0x5d/0x80 > ubsan_epilogue+0x5/0x2b > __ubsan_handle_out_of_bounds.cold+0x46/0x4b > ath5k_tasklet_tx+0x4e0/0x560 [ath5k] > tasklet_action_common+0xb5/0x1c0 It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1; with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; while the size is: #define IEEE80211_TX_MAX_RATES 4 is indeed bogus. Set this 'idx = -1' sentinel only if the array index is less than the array size. As mac80211 will not look at rates beyond the size (IEEE80211_TX_MAX_RATES). Note: The effect of the OOB write is negligible. It just overwrites the next member of info->status, i.e. ack_signal. | ||||
| CVE-2026-46303 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate Rock Ridge CE continuation extent against volume size rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice. | ||||
| CVE-2026-46209 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs() drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions using plain integer division: unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1); However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses drm_format_info_plane_width/height() which round up dimensions via DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object size check for certain pixel format and dimension combinations. For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the GEM size validation path sees height=0 instead of height=1. The expression (height - 1) then wraps to UINT_MAX as an unsigned int, causing min_size to overflow and wrap back to a small value. A tiny GEM object therefore passes the size guard, yet when the GPU accesses the chroma plane it will read or write memory beyond the object's bounds. Fix by replacing the open-coded divisions with drm_format_info_plane_width() and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match the calculation already used in framebuffer_check(). | ||||
| CVE-2026-46190 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array. | ||||
| CVE-2026-46163 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: b43legacy: enforce bounds check on firmware key index in RX path Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices. | ||||