Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53333 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path. | ||||
| CVE-2026-53343 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in __switch_to(). The read uses ldr, but the KASAN shadow address is byte-granular and is not guaranteed to be word aligned. ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to() with an alignment exception before reaching init. Use ldrb for the dummy shadow access. The code only needs to fault in the shadow mapping if the stack shadow is missing, so a byte load is sufficient and matches the granularity of KASAN shadow memory. | ||||
| CVE-2026-53331 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | ||||
| CVE-2026-53351 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI Fixes a warning while dumping core: [54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 | ||||
| CVE-2026-53328 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-13772 | 1 Ibm | 1 Websphere Extreme Scale | 2026-07-01 | 7.5 High |
| IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 's Object Query Language engine resolves attacker-supplied class names via Class.forName() and invokes their constructors with no allow-list at three distinct sinks (SELECT NEW, enum literals, and reflection-based comparators); an authenticated remote attacker who can influence an application-built OQL query string can execute arbitrary constructors on the WAS JVM, and a SELECT DISTINCT variant using planted grid values fires the same gadget post-readObject in a manner that survives JEP-290 serialization filters across grid node boundaries | ||||
| CVE-2026-10560 | 2 Ibm, Langflow | 2 Langflow Oss, Langflow | 2026-07-01 | 8.2 High |
| IBM Langflow OSS 1.0.0 through 1.9.6 contains a missing authentication vulnerability in /api/v1/build_public_tmp/ endpoints that allows an unauthenticated attacker to read build event data or cancel jobs using a valid job identifier, resulting in information disclosure and denial of service. | ||||
| CVE-2025-36372 | 4 Ibm, Linux, Microsoft and 1 more | 4 Db2, Linux Kernel, Windows and 1 more | 2026-07-01 | 5.5 Medium |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could disclose sensitive information to an authenticated user from the monitoring and event tables. | ||||
| CVE-2026-12085 | 1 Ibm | 4 Devops Deploy, Ucd Ibm Devops Deploy, Ucd Ibm Urbancode Deploy and 1 more | 2026-07-01 | 6.5 Medium |
| IBM UCD - IBM UrbanCode Deploy 7.3 through 7.3.2.18 and IBM UCD - IBM DevOps Deploy 8.0 through 8.0.1.13, 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 IBM DevOps Deploy could disclose sensitive configurations and secrets to authenticated users in API responses that could be used in further attacks against the system. | ||||
| CVE-2026-12084 | 1 Ibm | 2 Devops Deploy, Ucd Ibm Devops Deploy | 2026-07-01 | 5.4 Medium |
| IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. | ||||
| CVE-2026-9002 | 1 Ibm | 1 Websphere Extreme Scale | 2026-06-30 | 6.5 Medium |
| IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 could allow an adjacent attacker to cause a denial of service due to improper validation in the XDF decoder. The application processes deeply nested Protocol Buffers messages and attacker-controlled length prefixes without sufficient bounds checking, which may allow an attacker on the same network to trigger a StackOverflowError or OutOfMemoryError, resulting in a crash of the WebSphere Application Server JVM. | ||||
| CVE-2026-9836 | 1 Ibm | 1 Infosphere Information Server | 2026-06-30 | 3.5 Low |
| IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 is affected by an information disclosure vulnerability. | ||||
| CVE-2026-7803 | 2 Ibm, Langflow | 2 Langflow Oss, Langflow | 2026-06-30 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 could allow arbitrary code execution due to improper validation of flow nodes with missing or empty component type fields. | ||||
| CVE-2026-13437 | 1 Devolutions | 1 Powershell Universal | 2026-06-29 | 6.5 Medium |
| Insertion of sensitive information into sent data in the AI Agent job API in Devolutions PowerShell Universal 2026.2.0 allows an authenticated user with AI Agent read access to obtain reusable, potentially higher-privileged authentication tokens via App Tokens serialized in plaintext in job API responses. | ||||
| CVE-2023-37524 | 1 Hcltech | 1 Traveler For Microsoft Outlook | 2026-06-29 | 7.7 High |
| HCL Traveler for Microsoft Outlook (HTMO) is susceptible to vulnerabilities due to .NET Framework 4.5 being out of service. Since .NET Framework 4.5 has reached end-of-life and no longer receives security updates, it may expose the application to publicly known security weaknesses through vulnerable third-party components. | ||||
| CVE-2026-53320 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy] | ||||
| CVE-2026-53310 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix cross-fabric target timeout lookup When a fabric receives an error interrupt, the error may have occurred on a different fabric. The target timeout lookup was using the wrong base address (cbb->regs) with offsets from a different fabric's target map, causing a kernel page fault. Unable to handle kernel paging request at virtual address ffff80000954cc00 pc : tegra234_cbb_get_tmo_slv+0xc/0x28 Call trace: tegra234_cbb_get_tmo_slv+0xc/0x28 print_err_notifier+0x6c0/0x7d0 tegra234_cbb_isr+0xe4/0x1b4 Add tegra234_cbb_get_fabric() to look up the correct fabric device using fab_id, and use its base address for accessing target timeout registers. | ||||
| CVE-2026-53282 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Push kjump return address even for non-kjump kexec The version of purgatory code shipped by kexec-tools attempts to look above the top of its stack to find a return address for a kjump, even in a non-kjump kexec. After the commit in Fixes: the word above the stack might not be there, leading to a fault (which is at least now caught by my exception-handling code in kexec). That commit fixed things for the actual kjump path, but no longer "gratuitously" pushes the unused return address to the stack in the non-kjump path. Put that *back* in the non-kjump path, to prevent purgatory from crashing when trying to access it. | ||||
| CVE-2026-53201 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend" This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6. The idle-skip optimization bypasses GuC suspend, so the GPU may not perform the context switch that flushes TLB entries for invalidated userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB invalidation and page faults during userptr invalidation tests. Restore unconditional schedule toggling on suspend so the context-switch TLB flush is always performed. This optimization will be reintroduced with a fix that does not skip suspend in LR/preempt-fence VM mode. (cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) | ||||