Export limit exceeded: 421045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421045 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46234 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock: fix buffer size clamping order In vsock_update_buffer_size(), the buffer size was being clamped to the maximum first, and then to the minimum. If a user sets a minimum buffer size larger than the maximum, the minimum check overrides the maximum check, inverting the constraint. This breaks the intended socket memory boundaries by allowing the vsk->buffer_size to grow beyond the configured vsk->buffer_max_size. Fix this by checking the minimum first, and then the maximum. This ensures the buffer size never exceeds the buffer_max_size. | ||||
| CVE-2026-46229 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake. | ||||
| CVE-2026-46224 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo is not freed. Add xe_bo_free(storage) before returning the error. xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own error paths. Otherwise, since xe_gem_prime_import() cannot distinguish whether the failure originated from xe_dma_buf_init_obj() or from xe_bo_init_locked(), it cannot safely decide whether the bo should be freed. Add comments documenting the ownership semantics: on success, ownership of storage is transferred to the returned drm_gem_object; on failure, storage is freed before returning. v2: Add comments to explain the free logic. (cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) | ||||
| CVE-2026-46220 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions that verify fence writeback addresses are dword-aligned. These assertions can be reached from unprivileged userspace via crafted DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a scheduler worker thread. Replace both BUG_ON() calls with WARN_ON() to log the condition without crashing the kernel. A misaligned fence address at this point indicates a driver bug, but crashing the kernel is never the correct response when the assertion is reachable from userspace. The CS IOCTL path is the correct place to filter invalid submissions; the ring emission callback is too late to do anything about it. (cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) | ||||
| CVE-2026-46216 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status() When media GT is disabled via configfs, there is no allocation for media_gt, which is kept as NULL. In such scenario, intel_hdcp_gsc_check_status() results in a kernel pagefault error due to >->uc.gsc being evaluated as an invalid memory address. Fix that by introducing a NULL check on media_gt and bailing out early if so. While at it, also drop the NULL check for gsc, since it can't be NULL if media_gt is not NULL. v2: - Get address for gsc only after checking that gt is not NULL. (Shuicheng) - Drop the NULL check for gsc. (Shuicheng) v3: - Add "Fixes" and "Cc: <stable...>" tags. (Matt) (cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1) | ||||
| CVE-2026-46214 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix accept queue count leak on transport mismatch virtio_transport_recv_listen() calls sk_acceptq_added() before vsock_assign_transport(). If vsock_assign_transport() fails or selects a different transport, the error path returns without calling sk_acceptq_removed(), permanently incrementing sk_ack_backlog. After approximately backlog+1 such failures, sk_acceptq_is_full() returns true, causing the listener to reject all new connections. Fix by moving sk_acceptq_added() to after the transport validation, matching the pattern used by vmci_transport and hyperv_transport. | ||||
| CVE-2026-46207 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix empty payload in tap skb for non-linear buffers For non-linear skbs, virtio_transport_build_skb() goes through virtio_transport_copy_nonlinear_skb() to copy the original payload in the new skb to be delivered to the vsockmon tap device. This manually initializes an iov_iter but does not set iov_iter.count. Since the iov_iter is zero-initialized, the copy length is zero and no payload is actually copied to the monitor interface, leaving data un-initialized. Fix this by removing the linear vs non-linear split and using skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as vhost-vsock already does. This handles both linear and non-linear skbs, properly initializes the iov_iter, and removes the now unused virtio_transport_copy_nonlinear_skb(). While touching this code, let's also check the return value of skb_copy_datagram_iter(), even though it's unlikely to fail. | ||||
| CVE-2026-46196 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration. | ||||
| CVE-2026-46193 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. | ||||
| CVE-2026-46191 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fbcon: Avoid OOB font access if console rotation fails Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message | ||||
| CVE-2026-46189 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path Sashiko points out that pvrdma_uar_free() is already called within pvrdma_dealloc_ucontext(), so calling it before triggers a double free. | ||||
| CVE-2026-46188 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeon_ep_vf: add NULL check for napi_build_skb() napi_build_skb() can return NULL on allocation failure. In __octep_vf_oq_process_rx(), the result is used directly without a NULL check in both the single-buffer and multi-fragment paths, leading to a NULL pointer dereference. Add NULL checks after both napi_build_skb() calls, properly advancing descriptors and consuming remaining fragments on failure. | ||||
| CVE-2026-46184 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sound: ua101: fix division by zero at probe Add a missing sanity check for bNrChannels in detect_usb_format() to prevent a division by zero in playback_urb_complete() and capture_urb_complete(). USB core does not validate class-specific descriptor fields such as bNrChannels, so drivers must verify them before use. If a device provides bNrChannels = 0, frame_bytes becomes zero and is later used as a divisor in the URB completion handlers, leading to a kernel crash. | ||||
| CVE-2026-46182 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace The hdr variable is allocated on the stack and only hdr.version and hdr.flags are initialized explicitly. Because the struct papr_hvpipe_hdr contains reserved padding bytes (reserved[3] and reserved2[40]), these could leak the uninitialized bytes to userspace after copy_to_user(). This patch fixes that by initializing the whole struct to 0. | ||||
| CVE-2026-46180 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). | ||||
| CVE-2026-46172 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. | ||||
| CVE-2026-46170 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself". | ||||
| CVE-2026-46168 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. | ||||
| CVE-2026-46167 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening. | ||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | ||||