Export limit exceeded: 11855 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11855 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-86303 | 1 92181 | 1 Markdown | 2026-09-08 | 7.3 High |
| A vulnerability was determined in 92181 markdown up to 058cab0cb7fb245a0ccc6b8446963ff8d573558f. Affected by this issue is the function lds of the file md.c. Executing a manipulation can lead to out-of-bounds read. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called c000d2f9cf390c315378d3717cf20911cf3e80a6. A patch should be applied to remediate this issue. | ||||
| CVE-2026-71441 | 3 Adobe, Apple, Microsoft | 5 Illustrator, Illustrator Desktop 2025, Illustrator Desktop 2026 and 2 more | 2026-09-08 | 5.5 Medium |
| Illustrator is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-56015 | 1 Tpoder | 1 Net::ip::lpm | 2026-09-07 | 9.1 Critical |
| Net::IP::LPM versions before 1.11 for Perl allow a heap out-of-bounds read via an unbounded prefix length. add() passes the prefix string to the trie builder addPrefixToTrie() without checking it against the address width. addPrefixToTrie() then walks the prefix buffer by prefix_length bits, reading prefix[byte] for byte up to prefix_len/8, where prefix is the 4-byte (IPv4) or 16-byte (IPv6) packed address. A prefix length greater than 32 for IPv4 or 128 for IPv6, for example add("1.2.3.4/255", $v) or add("2001:db8::/255", $v), reads past the end of the packed address. The out-of-bounds read happens during trie construction and is bounded: the prefix length is stored as an unsigned char, so the bit walk reads at most 32 bytes from the start of the packed address, a short distance past the end of the 4-byte or 16-byte buffer. It is detectable under AddressSanitizer, valgrind, or a hardened allocator, where it can abort the process. Lookups and dump() format only the valid address width, so the out-of-bounds bytes are not exposed through the module's API. | ||||
| CVE-2026-54209 | 1 Tobit Laboratories Ag | 1 Teamdavid | 2026-09-07 | N/A |
| Tobit Laboratories AG TeamDavid's Webbox application handles password changes using a function triggered by including the string "(editini)" in the file path, writing the new password to the specified "Archive.ini" file. However, the application does not verify that the provided path actually refers to an "Archive.ini" file. If an attacker specifies a different file with excessive size, a buffer overflow occurs. This vulnerability allows an unauthenticated attacker to crash the server, resulting in denial of service. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | ||||
| CVE-2026-49509 | 1 Samsung Open Source | 1 Escargot | 2026-09-06 | 4.4 Medium |
| Out-of-bounds read vulnerability in Samsung Opensource rLottie allows Overread Buffers. This issue affects rLottie: 25648aef19187b3f87f4d9420b8d761453ad4630. | ||||
| CVE-2026-85090 | 1 Freerdp | 1 Freerdp | 2026-09-05 | 5.4 Medium |
| FreeRDP before 3.31.0 contains a heap out-of-bounds read vulnerability in the general_ChromaV1ToYUV444 function during AVC444 chroma plane reconstruction. A malicious RDP server can craft a RFX_AVC444_BITMAP_STREAM with specific frame geometry to trigger an out-of-bounds memory read past the allocated luma plane. | ||||
| CVE-2026-80800 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(), and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same pattern remains unbounded: nfc_llcp_connect_sn(). nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header (type, length) followed by length bytes of value, without checking that the two header bytes or the declared length stay within the buffer. It returns a pointer to a service name of up to 255 bytes that may point past the end of the skb; it is subsequently consumed by memcmp() in nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as "skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter than the LLCP header underflows to a huge length and the walk runs far past the buffer. nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP, and the nfc_llcp_rx_skb() dispatcher applies no minimum-length guard. Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and validate each declared length before use, matching the approach already used for nfc_llcp_recv_snl(). Starting the walk at &skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the size_t underflow for short frames. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80772 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here. | ||||
| CVE-2026-55402 | 1 Absolute | 1 Secure Access | 2026-09-04 | 5.9 Medium |
| CVE-2026-55402 is an out of bounds read vulnerability in Secure Access servers prior to version 14.57. Attackers with an ‘in the middle’ position can send specially crafted data to a server causing a persistent denial of service. | ||||
| CVE-2026-80839 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject unrepresentable multicast TVLV offsets The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. | ||||
| CVE-2026-80827 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: option: fix slab OOB read in interrupt URB callback The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(struct usb_ctrlrequest)] which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte buffer. This results in a slab out-of-bounds read. Fix this by adding the missing bounds check: first verify that the actual length is large enough to contain the struct usb_ctrlrequest header before accessing req_pkt->bRequestType and req_pkt->bRequest, and then verify that there is an additional byte for the modem signal state before reading data[sizeof(struct usb_ctrlrequest)] inside the conditional. Use sizeof(*req_pkt) instead of sizeof(struct usb_ctrlrequest) for consistency. [ johan: use dev_err(); split signals declaration and initialisation ] | ||||
| CVE-2026-43820 | 1 Apple | 1 Swiftnio Ssl | 2026-09-04 | 7.7 High |
| NIOSSLCertificate._subjectAlternativeNames provides access to the raw bytes for a cert's SANs. NIOSSL provides access to a buffer assumed to be backed by an ASN1_STRING, but not all SANs are backed by ASN1_STRING, so accessing the buffer for such a type can lead to out-of-bounds memory access. This vulnerability is addressed in swift-nio-ssl version 2.37.2. | ||||
| CVE-2026-80803 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res field without an upper-bound check. A nearby malicious NFC-F device can send an oversized SENSF_RES response to overflow the stack-local struct nfc_target. Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80759 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment. | ||||
| CVE-2026-80812 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the given devptr->id value is within the proper card index range. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80814 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that data_offset + data_len + 8 does not wrap, which would enable an OOB read of the USB data buffer. | ||||
| CVE-2026-80823 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length is at least sizeof(struct st21nfca_atr_req), but never checks that atr_req->length does not exceed the actual received length (skb->len). st21nfca_tm_send_atr_res() then trusts the declared length: gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); ... memcpy(atr_res->gbi, atr_req->gbi, gb_len); so an RF peer that sends a short frame but sets atr_req->length larger than the frame makes gb_len exceed the general bytes actually present, and the memcpy reads out of bounds past the received skb. Those bytes are placed in the ATR_RES and sent back to the peer (kernel-memory disclosure to a proximity attacker); a larger declared length is an out-of-bounds read (DoS). Reject frames whose declared length exceeds the received length. The adjacent nfc_tm_activated() path in the same function already derives its general-bytes length from skb->len rather than the declared field. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||
| CVE-2026-85522 | 1 Valkey-io | 1 Valkey | 2026-09-04 | 5.3 Medium |
| A vulnerability was detected in valkey-io valkey up to 9.5.4/9.1.0. Affected by this vulnerability is the function createSlotImportJob of the file src/cluster_migrateslots.c of the component Slot Migration. The manipulation of the argument job_name results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 9.0.5 and 9.1.1 addresses this issue. The patch is identified as f4dc3ca09eb650c2fe14060090a41c524eca803f. Upgrading the affected component is advised. | ||||
| CVE-2026-64361 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward. | ||||
| CVE-2026-64407 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent. | ||||