| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. |
| A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. In the VNC TLS I/O handlers, retryable GnuTLS results (GNUTLS_E_AGAIN and GNUTLS_E_INTERRUPTED) are handled with an unbounded busy loop instead of yielding to the event loop. A remote attacker who can reach an enabled VNC TLS listener can cause the event-loop thread to spin at high CPU with no forward progress, resulting in denial of service. |
| Moleculer is a progressive microservices framework for Node.js. Prior to 0.14.36 and 0.15.2, Parser._write in src/transporters/tcp/parser.js used Buffer.prototype.readInt32BE to read a signed packet length, so a remote unauthenticated peer could supply a negative value that caused packet.slice(length) to return the unchanged buffer while the while (packet.length > 0) loop continued indefinitely. The synchronous loop blocked the Node.js event loop and made every service in the process unresponsive until restart. The TCP transporter must be enabled and reachable, and neither CRC validation nor maxPacketSize prevents the malformed length value. This issue is fixed in versions 0.14.36 and 0.15.2. |
| Converting crafted BIG-HKSCS input to UCS-4 or the internal wide character encoding, for example with iconv, in the GNU C Library version 2.18 through 2.31 may result in the converter making no progress, causing the calling application to hang. |
| FreeRDP before 3.32.2 contains an infinite loop vulnerability in websocket_context_read that fails to handle a zero BIO result with payload outstanding. A malicious RD Gateway can send a truncated WebSocket frame followed by a TLS close_notify, causing a client thread to spin and consume CPU until killed. |
| sngrep through 1.9.0 contains an infinite loop vulnerability in capture_packet_reasm_ip() in src/capture.c that allows attackers to cause denial of service via crafted NFLOG TLVs. Attackers can supply a pcap file with link type NFLOG containing a non-payload TLV with length under 4, making the capture thread spin at full CPU and stop processing packets. |
| A malicious X server could send malformed RECORD EnableContext reolies that can cause a X client using the parse_reply_call_callback function in libXtst before 1.2.6 to enter a endless loop. |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, built with IPv6, the ICMPv6 option validator accepts an option area that ends in a one- or two-byte residue, and the Router Advertisement, Neighbor Solicitation, Neighbor Advertisement and Redirect handlers then walk it without length checks. A host on the local link can send one such message to make the IP thread read past the packet or loop forever, and can place off-packet memory in the neighbor cache. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option. |
| CGI versions before 5.00 for Perl allow an infinite loop on a short request body when $DISABLE_UPLOADS is set.
When $CGI::PUTDATA_UPLOAD or an upload hook is set, read_postdata_putdata takes a request body that is not a form submission. With $CGI::DISABLE_UPLOADS set, it discards the body by reading until Content-Length bytes have arrived. Once a body shorter than its Content-Length runs out, every read returns 0, so the loop never ends.
A client can keep a server process spinning with one such request. |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior.
When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835).
An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence.
The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts. |
| isomorphic-git is a pure JavaScript implementation of Git for Node.js and browsers. Prior to 1.38.6, isomorphic-git persists server-supplied circular symref= capabilities through updateRemoteRefs, and GitRefManager.resolve() follows the resulting loose symbolic references without a default depth limit or cycle detection. After a clone from a malicious or man-in-the-middle-controlled remote, operations such as log, status, checkout, and branch that resolve refs/remotes/origin/a or refs/remotes/origin/b do not terminate. The circular references remain on disk, leaving the repository unusable for the application and causing a persistent denial of service. This issue is fixed in version 1.38.6. |
| FreeRDP before 3.32.2 contains a denial of service vulnerability in the shadow server that allows authenticated RDP clients to spin server threads by sending zero-length drdynvc DATA PDUs. Attackers can send empty DATA messages on opened audin or rdpgfx channels, so that FreeRDP_WTSVirtualChannelRead never consumes them, consuming full CPU cores until disconnect. |
| FreeRDP before 3.32.2 contains a denial-of-service vulnerability in rdg_process_control_packet that allows a malicious RD Gateway to exhaust client CPU by sending an incomplete keepalive control packet. Attackers completing the RDG tunnel-open exchange then send an eight-byte header with packetLength 0xFFFF and withhold the body, causing an unbounded no-progress read loop that spins one client thread at full CPU. |
| imagecodecs 2026.3.6 through 2026.10.10 contains an infinite loop vulnerability in ccitt_fax4_decode_size() that allows attackers to hang the calling process by supplying a crafted CCITT Group 4 stream. Attackers can provide an 8-byte G4 stream lacking EOFB to ccittfax4_decode() or the numcodecs Ccittfax4 codec, consuming full CPU until the process is killed. |
| The VobSub subtitle decoder libsub_vob (part of the Amlogic DroidLogic SubTitleService), as shipped on Nexbox A95X (Amlogic S905X) TV boxes, contains an infinite loop vulnerability in get_vob_spu() that allows unauthenticated network attackers or local users loading malicious files to trigger an unreachable loop exit condition via mismatched length fields. Attackers can send crafted AMLU data blocks over the unauthenticated tcp/10100 listener or via a malicious VobSub (.sub) file to cause the subtitle decode thread to spin at 100% CPU indefinitely, resulting in denial of service. |
| A vulnerability has been found in phpMyAdmin ShapeFile up to 4.0.1. Impacted is the function ShapeRecord::loadFromFile of the component SHP File Handler. Such manipulation leads to infinite loop. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Kvazaar through 2.3.2 contains an infinite loop vulnerability in read_header() in src/encmain.c that allows attackers to hang the command-line encoder by supplying a truncated Y4M header. Attackers can provide a crafted .y4m file lacking a terminating newline, causing unchecked EOF reads that hang the process indefinitely while consuming a full CPU core. |
| A remotely exploitable denial-of-service vulnerability exists in the TCP options parser of the Nut/Net TCP/IP stack included in Nut/OS, developed by Ethernut/Egnite. Nut/OS releases up to version 5.1 are affected. An unauthenticated attacker can send a single TCP segment containing an unknown TCP option with a length byte of zero to any open TCP port on a vulnerable device. When processed, this malformed option triggers an infinite loop in the function NutTcpInputOptions, permanently blocking the TCP processing thread and rendering all TCP-based services unresponsive until the device is rebooted. |
