| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation vulnerability in Apache ActiveMQ, Apache ActiveMQ KahaDB.
The ActiveMQ broker resolves connection, session and consumer state from ids that are user provided and in some scenarios does not validate that they ids are bound to that user. This allows an authenticated client to spoof another user's ids. This allows:
* an authenticated client consumes from another connection's temporary queue/topic by putting the victim's connection id in its own ConsumerId, bypassing the broker-side ownership check.
* a duplicate ConsumerId registration is only logged, after which the attacker's RemoveInfo or disconnect tears down the victim's live subscription
* a forged MessageAck for the victim's ConsumerId permanently deletes an in-flight, unacknowledged message.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; Apache ActiveMQ KahaDB: from 6.0.0 before 6.3.3, before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3, or 5.19.12, which fixes the issue. |
| Input validation vulnerability in Apache ActiveMQ configured to use the LDAPAuthorizationMapPlugin allows an authenticated attacker to create or address a destination with a crafted name containing LDAP DN special characters (such as comma, plus, equals, backslash) can manipulate the LDAP search base used for ACL lookups.
This issue affects Apache ActiveMQ: from 6.3.0 before 6.3.3, from 5.19.0 before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3 or 5.19.12, which fixes the issue. |
| Denial of Service via OOM vulnerability in Apache ActiveMQ, ActiveMQ Broker.
An authenticated OpenWire client that sends a ConsumerInfo for a temporary queue/topic owned by another connection is rejected with InvalidDestinationException, but the rejected Subscription is left behind in the region's subscriptions map. Repeating the request leaks broker heap until OOM because the broker does not clean up the rejected subscriptions in the map.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; ActiveMQ Broker: from 6.0.0 before 6.3.3, before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3, or 5.19.12, which fixes the issue. |
| An unauthenticated remote attacker can craft a CORE protocol SESSION_REATTACH packet to steal an existing session and assume ongoing execution of the previously authenticated session.
This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.57.0, which fixes the issue. |
| Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to execute arbitrary code only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to occupy a thread that consumes maximum CPU time and will never return. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability where the processed stream at unmarshalling time contains type information to recreate the formerly written objects. XStream creates therefore new instances based on these type information. An attacker can manipulate the processed input stream and replace or inject objects, that result in a server-side forgery request. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is vulnerability which may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. No user is affected who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14. |
| Improper input validation in TopicRegion in Apache ActiveMQ, Apache ActiveMQ Broker, and Apache ActiveMQ All on all platforms.
An authenticated client can spoof clientId when removing a durable topic subscription.
This issue affects Apache ActiveMQ Broker: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ All: before 5.19.11, from 6.0.0 before 6.3.2; Apache ActiveMQ: before 5.19.11, from 6.0.0 before 6.3.2.
Users are recommended to upgrade to version 6.3.2 or 5.19.11 which fixes the issue. |
| Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both:
- incoming Core protocol connections from untrusted sources to the broker
- outgoing Core protocol connections from the broker to untrusted targets
This issue affects:
- Apache Artemis from 2.50.0 through 2.51.0
- Apache ActiveMQ Artemis from 2.11.0 through 2.44.0.
Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue.
The issue can be mitigated by one of the following:
- Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core.
- Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability.
- Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html . |
| An unauthenticated remote attacker can create arbitrary durable queues via the CORE protocol, leading to unauthorized broker state manipulation and potential denial of service.
This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.57.0, which fixes the issue. |
| An unauthenticated remote attacker connecting with the CORE protocol can discover cluster node details by sending a SUBSCRIBE_TOPOLOGY request prior to authentication.
This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.57.0, which fixes the issue. |
| An unauthenticated network-adjacent attacker can leverage discovery to capture cluster administrative credentials during the initial cluster connection handshake.
This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.57.0, which fixes the issue. |
| When the broker is processing message-based management requests, sent by an authenticated messaging client that is authorized with MANAGE permission to perform management-via-messaging, the parameter processing can trigger Java deserialization of certain method parameters that the broker will not utilise. The permitted types allow to craft a payload causing excessive computation and pinning the processing thread, leading to denial of service.
This issue affects Apache Artemis: from 2.50.0 through 2.56.0; Apache ActiveMQ Artemis: from 1.3.0 through 2.44.0.
Users are recommended to upgrade to version 2.57.0, which fixes the issue. |
