| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Insufficient Firmware Update Validation vulnerability could allow an authenticated malicious actor with access to UniFi Protect Cameras adjacent network to make unsupported changes to the camera system. |
| A vulnerability was determined in Belkin AX1800 1.1.00.016. Affected by this vulnerability is an unknown functionality of the component Firmware Update Handler. This manipulation causes insufficient verification of data authenticity. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the Device Analytics action frame processing of Cisco Wireless Access Point (AP) Software could allow an unauthenticated, adjacent attacker to inject wireless 802.11 action frames with arbitrary information.
This vulnerability is due to insufficient verification checks of incoming 802.11 action frames. An attacker could exploit this vulnerability by sending 802.11 Device Analytics action frames with arbitrary parameters. A successful exploit could allow the attacker to inject Device Analytics action frames with arbitrary information, which could modify the Device Analytics data of valid wireless clients that are connected to the same wireless controller. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| Improper authentication in the API authentication middleware of HCL DevOps Loop allows authentication tokens to be accepted without proper validation of their expiration and cryptographic signature. As a result, an attacker could potentially use expired or tampered tokens to gain unauthorized access to sensitive resources and perform actions with elevated privileges. |
| RICOH Streamline NX versions 3.5.1 to 24R3 are vulnerable to tampering with operation history. If an attacker can perform a man-in-the-middle attack, they may alter the values of HTTP requests, which could result in tampering with the operation history of the product’s management tool. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The implementation of EdDSA in EdDSA-Java (aka ed25519-java) through 0.3.0 exhibits signature malleability and does not satisfy the SUF-CMA (Strong Existential Unforgeability under Chosen Message Attacks) property. This allows attackers to create new valid signatures different from previous signatures for a known message. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| An issue in KIA Seltos vehicle instrument cluster with software and hardware v1.0 allows attackers to cause a Denial of Service (DoS) via ECU reset UDS service. NOTE: this is disputed by the Supplier because the findings came from a potentially unrealistic test environment (an isolated ECU part that was not in a vehicle), and because the ECUReset specification does not allow a manufacturer to require SecurityAccess and Authentication. |
| Laravel Reverb provides a real-time WebSocket communication backend for Laravel applications. Prior to 1.4.0, there is an issue where verification signatures for requests sent to Reverb's Pusher-compatible API were not being verified. This API is used in scenarios such as broadcasting a message from a backend service or for obtaining statistical information (such as number of connections) about a given channel. This issue only affects the Pusher-compatible API endpoints and not the WebSocket connections themselves. In order to exploit this vulnerability, the application ID which, should never be exposed, would need to be known by an attacker. This vulnerability is fixed in 1.4.0. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| The firmware upgrade function in the admin web interface of the Rittal IoT Interface & CMC III Processing Unit devices checks if
the patch files are signed before executing the containing run.sh
script. The signing process is kind of an HMAC with a long string as key
which is hard-coded in the firmware and is freely available for
download. This allows crafting malicious "signed" .patch files in order
to compromise the device and execute arbitrary code. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper signature verification in AMD CPU ROM microcode patch loader may allow an attacker with local administrator privilege to load malicious microcode, potentially resulting in loss of integrity of x86 instruction execution, loss of confidentiality and integrity of data in x86 CPU privileged context and compromise of SMM execution environment. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| The RegistrationMagic – Custom Registration Forms, User Registration, Payment, and User Login plugin for WordPress is vulnerable to payment bypass due to insufficient verification of data authenticity on the 'process_paypal_sdk_payment' function in all versions up to, and including, 6.0.6.9. This is due to the plugin trusting client-supplied values for payment verification without validating that the payment actually went through PayPal. This makes it possible for unauthenticated attackers to bypass paid registration by manipulating payment status and activating their account without completing a real PayPal payment. |
| An issue in the firmware update mechanism of Nous W3 Smart WiFi Camera v1.33.50.82 allows unauthenticated and physically proximate attackers to escalate privileges to root via supplying a crafted update.tar archive file stored on a FAT32-formatted SD card. |
