| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: target: rdma: fix ndev refcount leak on queue connect
nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which
acquires a reference on the returned ndev via kref_get(). On the path
where the host queue backlog is exceeded and the function returns
NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking
the kref.
Fix this by adding a goto to the existing put_device label before the
early return. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() and gen_split_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: drbg - Fix returning success on failure in CTR_DRBG
drbg_ctr_generate() sometimes returns success when it fails, leaving the
output buffer uninitialized. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
scmi_regulator_probe() calls of_find_node_by_name() which takes a
reference on the returned device node. On the error path where
process_scmi_regulator_of_node() fails, the function returns without
calling of_node_put() on the child node, leaking the reference.
Add of_node_put(np) on the error path to properly release the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: do file ownership checks with the proper mount idmap
Ever since idmapped mounts were introduced, inode ownership checks (for
side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done
against the nop_mnt_idmap, which completely ignores the file's mount's
idmap. This results in odd edgecases like:
1) mount/bind-mount with an idmap userA:userB:1
2) userB runs an owner_or_capable() check on file that is owned by userA
on-disk/in-memory, but owned by userB after idmap translation
3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied
In the case of mincore/madvise MADV_PAGEOUT, this is usually benign,
because file_permission(file, MAY_WRITE) will probably succeed, as it uses
the proper idmap internally, but it does not need to be the case on e.g a
0444 file where even the owner itself doesn't have permissions to write to
it.
Since this is clearly not trivial to get right, introduce a
file_owner_or_capable() that can carry the correct semantics, and switch
the various users in mm to it.
The issue was found by manual code inspection & an off-list discussion
with Jan Kara. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Move vevent memory allocation outside spinlock
The veventq memory allocation happens inside the spinlock. Given its depth
is decided by the user space, this leaves a vulnerability, where userspace
can allocate large queues to exhaust atomic memory reserves.
Move the allocation outside the spinlock and use GFP_NOWAIT, which can fail
fast under memory pressure without dipping into the GFP_ATOMIC reserves or
direct-reclaiming from the threaded IRQ handler. On allocation failure,
queue the lost_events_header (so userspace learns of the drop) and return
-ENOMEM so the caller learns of the kernel-side memory pressure.
This is intentionally distinct from the queue-overflow path, which also
queues the lost_events_header but returns 0: a full queue is an expected
userspace-pacing condition rather than a kernel error.
A subsequent change will cap the upper bound of the veventq_depth. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set veventq_depth upper bound
iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with
an upper bound at U32_MAX.
This leaves a vulnerability where userspace can allocate excessively large
queues to exhaust kernel memory reserves.
Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the
maximum number of entries in the SMMUv3 EVTQ (the largest use case today). |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Break the loop on failure in iommufd_fault_fops_read()
On a copy_to_user() failure inside the inner list_for_each_entry, only the
inner loop breaks; the outer while re-fetches the just-restored fault group
and retries the failing copy_to_user() forever, spinning the reader at 100%
CPU with fault->mutex held.
Check rc after the inner loop and break the outer while as well. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set upper bounds on cache invalidation entry_num and entry_len
iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len,
each bounded only by U32_MAX. An entry_len beyond the kernel's struct size
makes the copy helper verify the extra bytes are zero, scanning that excess
in one uninterruptible pass; a multi-gigabyte value over zeroed user memory
trips the soft-lockup watchdog.
A large entry_num is the other half, driving the backend invalidation loop
with no reschedule. The VT-d nested handler, for one, copies each entry and
flushes caches per iteration, pinning the CPU on a non-preemptible kernel.
Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request
struct, and entry_num under 1 << 19, the order of a hardware invalidation
queue and well beyond any real batch, bounding the per-call loop length. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - prevent division by zero and arithmetic underflow
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - fix touch indexing for MMS134S and MMS136
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: touchwin - reset the packet index on every complete packet
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - reject an oversized device packet size
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't wrap around quota ids in dqiterate
LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens
to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot
for ID_MAX, then this addition will truncate to zero and the iteration
starts over. Fix this by casting to u64. |
