Export limit exceeded: 421198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54478 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19741 | 1 Zephyrproject | 1 Zephyr | 2026-11-02 | 7.5 High |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. | ||||
| CVE-2026-115845 | 1 Aws | 2 Aws-mcp-server, Aws Mcp Server | 2026-11-02 | 6.4 Medium |
| An incomplete list of disallowed inputs in the Python code validator of the run_script tool in AWS MCP Server might allow an authenticated remote user to execute arbitrary code within their own isolated session environment via a crafted script. AWS fixed this issue service-side. No customer action is required. | ||||
| CVE-2026-97229 | 2 Gitlab, Ruby-lang | 2 Gitlab, Ruby | 2026-11-02 | 10 Critical |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.2 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an unauthenticated user to execute arbitrary code on the GitLab server via a specially crafted regular expression in a CI/CD configuration, due to insufficient regular expression validation. | ||||
| CVE-2026-115519 | 1 Knime | 1 Business Hub | 2026-11-02 | N/A |
| Missing security attributes on sensitive cookies in KNIME Business Hub before version 1.19.0 allow an unauthenticated remote attacker to compromise user sessions if other security issues such as a cross-site scripting vulnerability or a man-in-the-middle attack are present. A workaround is not possible. | ||||
| CVE-2026-114649 | 1 Mongodb | 1 C# Driver | 2026-11-02 | 6.8 Medium |
| The MongoDB C# Driver compares TLS client certificates by issuer and serial number only when deciding whether two clients can share cached connections. In an application that creates clients from certificates supplied by different users, a user who provides a certificate copying another user's issuer and serial number, without that user's private key, can be given connections authenticated with the other user's certificate. Database operations can then run under the other user's identity, affecting the confidentiality and integrity of data that identity can access. | ||||
| CVE-2026-107858 | 2026-11-02 | N/A | ||
| Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback. | ||||
| CVE-2026-83770 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 9.8 Critical |
| Heap-based buffer overflow in Windows Text Shaping allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-83775 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83777 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-02 | 8.8 High |
| Heap-based buffer overflow in Windows Bluetooth Service allows an unauthorized attacker to elevate privileges over an adjacent network. | ||||
| CVE-2026-83779 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7.8 High |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83781 | 1 Microsoft | 13 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 10 more | 2026-11-02 | 7.8 High |
| Improper null termination in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83782 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 9.8 Critical |
| Heap-based buffer overflow in Windows Shell allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-83783 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7.8 High |
| Heap-based buffer overflow in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-15195 | 1 Apidevtools | 1 Json-schema-ref-parser | 2026-11-02 | 6.3 Medium |
| A weakness has been identified in apidevtools json-schema-ref-parser. This impacts the function Refs.set/Pointer.set in the library lib/pointer.ts. Executing a manipulation can lead to improperly controlled modification of object prototype attributes. The attack can be launched remotely. Upgrading to version 15.3.6 will fix this issue. This patch is called a786bc6afc3674f650496472ee93d5cf74c4bd84. It is suggested to upgrade the affected component. The project maintainer confirms: "I reproduced prototype pollution through the public $Refs.set() API in published versions 7.1.4, 9.0.0, 11.0.0, 14.0.0, 14.2.1, 15.3.0, and 15.3.5. The same pointer is rejected by 15.3.6 without modifying Object.prototype. This reported path requires an application to pass an attacker-controlled pointer to $Refs.set(); dependency presence alone does not establish exploitability." | ||||
| CVE-2026-111274 | 1 Selmf | 1 Unarr | 2026-11-02 | 5.5 Medium |
| unarr through 1.1.1 contains a heap-based out-of-bounds read in zip_parse_extra_fields() in zip/parse-zip.c due to an incorrect ZIP64 extra field length check. Attackers can supply a crafted ZIP archive with 0xFFFFFFFF sentinel values and a truncated ZIP64 record to read past the heap buffer and crash the process. | ||||
| CVE-2026-99154 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Reject a negative task index from parse_pdu_itt A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. | ||||
| CVE-2026-7233 | 1 Artifex | 1 Mupdf | 2026-11-01 | 3.3 Low |
| A vulnerability was determined in Artifex MuPDF. The impacted element is the function fz_subset_cff_for_gids of the file subset-cff.c of the component CFF Index Handler. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through a bug report but has not responded yet. | ||||
| CVE-2026-15565 | 1 Redhat | 13 Build Of Apache Camel For Spring Boot, Camel Spring Boot, Data Grid 8 and 10 more | 2026-11-01 | 7.5 High |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. | ||||
| CVE-2026-85908 | 1 Microsoft | 32 Office, Office 365, Office Macos 2021 and 29 more | 2026-10-31 | 7.8 High |
| Heap-based buffer overflow in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83651 | 1 Microsoft | 32 Office, Office 365, Office Macos 2021 and 29 more | 2026-10-31 | 6.5 Medium |
| Out-of-bounds read in Windows GDI allows an unauthorized attacker to disclose information over a network. | ||||