| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This issue affects Apache Fineract versions up to and including 1.15.0. The Center read endpoint (GET /api/v1/centers) and the datatable entry read endpoints (GET /api/v1/datatables/{datatable}/{apptableId} and GET /api/v1/datatables/{datatable}/{apptableId}/{datatableId}) concatenate caller-supplied ordering parameters (orderBy, sortOrder, order) directly into the SQL ORDER BY clause. The existing regex-based input validation can be bypassed, allowing time-based blind SQL injection by any authenticated user with read access to centers or to the targeted datatable.
Users are recommended to upgrade to 1.16.1 which fixes the issue. |
| Improper Neutralization of Special Elements used in an SQL Command ("SQL Injection") vulnerability exists in Apache Fineract (through version 1.15.0). The vulnerability affects the outStandingAmountPercentageCondition parameter of the /fineract-provider/api/v1/search/advance HTTP API endpoint, allowing SQL injection due to insufficient input neutralization. Users are recommended to upgrade to version 1.16.1, which will fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in
guest mode so that a future change can have update CR8 intercepts during
vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion.
------------[ cut here ]------------
debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count))
WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879
WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879
Modules linked in:
CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline]
RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879
Call Trace:
<TASK>
apic_update_ppr arch/x86/kvm/lapic.c:984 [inline]
kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023
kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986
kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847
kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201
kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not trim a device which is not writeable
[BUG]
There is a bug report that btrfs/242 can randomly fail with the
following NULL pointer dereference:
run fstests btrfs/242 at 2026-06-01 10:25:08
BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609)
BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874
BTRFS info (device sdc): using crc32c checksum algorithm
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing
BTRFS info (device sdc): allowing degraded mounts
BTRFS info (device sdc): turning on async discard
BTRFS info (device sdc): enabling free space tree
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000
CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_trim_fs+0x34c/0xa00 [btrfs]
lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs]
Call trace:
btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P)
btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840]
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x5c/0xd0
el0_svc_common.constprop.0+0x40/0xf0
do_el0_svc+0x24/0x40
el0_svc+0x40/0x1d0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00)
---[ end trace 0000000000000000 ]---
Also the reporter is very kind to test the following ASSERT() added to
btrfs_trim_free_extents_throttle():
ASSERT(device->bdev,
"devid=%llu path=%s dev_state=0x%lx\n",
device->devid, btrfs_dev_name(device), device->dev_state);
And it shows the following output:
assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82)
Which means the device->bdev is NULL, and the dev_state is
BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without
BTRFS_DEV_STATE_WRITEABLE flag set.
[CAUSE]
The pc points to the following call chain:
btrfs_trim_fs()
|- btrfs_trim_free_extents()
|- btrfs_trim_free_extents_throttle()
|- bdev_max_discard_sectors(device->bdev)
So the NULL pointer dereference is caused by device->bdev being NULL.
This looks impossible by a quick glance, as just before calling
btrfs_trim_free_extents_throttle(), we have skipped any device that has
BTRFS_DEV_STATE_MISSING flag set.
However in this particular case, there is a window where the missing
device is later re-scanned, causing btrfs to remove the
BTRFS_DEV_STATE_MISSING flag:
btrfs_control_ioctl()
|- btrfs_scan_one_device()
|- device_list_add()
|- rcu_assign_pointer(device->name, name);
| This updates the missing device's path to the new good path.
|
|- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state)
This removes the BTRFS_DEV_STATE_MISSING flag.
This allows the missing device to re-appear and clear the
BTRFS_DEV_STATE_MISSING flag. However the device still does not have
the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated.
The bdev pointer remains NULL, triggering the crash later.
[FIX]
This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and
device->bdev pointer, and shows a gap in btrfs's re-appearing-device
handling.
The proper handling of re-appearing device will need quite some extra
work, which is out of the context of this small
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert
loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or
fail. But its guard is inverted: it skips policies with prefixlen <
threshold and preallocates for the rest.
prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and
the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the
loop preallocates for the exact policies (which never allocate) and skips
the inexact ones, whose bin/node is then allocated GFP_ATOMIC during
reinsert. On failure the error path only WARN_ONCE()s and continues,
leaving a poisoned bydst node; the next rebuild's hlist_del_rcu()
dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure,
deterministic via failslab.
Invert the guard so preallocation covers exactly the reinserted policies;
the reinsert then allocates nothing and cannot fail.
Crash:
Oops: general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead...]
...
Workqueue: events xfrm_hash_rebuild
RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190
RAX: dead000000000122 (LIST_POISON2 + offset)
...
Call Trace:
hlist_del_rcu (include/linux/rculist.h:599)
xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: free fib_alias with kfree_rcu() on insert error path
fib_table_insert() publishes new_fa into the leaf's fa_list with
fib_insert_alias() before calling the fib entry notifiers. When a
notifier fails, the error path removes new_fa with fib_remove_alias()
(hlist_del_rcu) and frees it right away with kmem_cache_free().
fib_table_lookup() walks that list under rcu_read_lock() only, so a
concurrent lookup that already reached new_fa keeps reading it after the
free:
BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601)
Read of size 1 at addr ffff88810676d4eb by task exploit/297
Call Trace:
fib_table_lookup (net/ipv4/fib_trie.c:1601)
ip_route_output_key_hash_rcu (net/ipv4/route.c:2814)
ip_route_output_key_hash (net/ipv4/route.c:2705)
__ip4_datagram_connect (net/ipv4/datagram.c:49)
udp_connect (net/ipv4/udp.c:2144)
__sys_connect (net/socket.c:2167)
__x64_sys_connect (net/socket.c:2173)
do_syscall_64
entry_SYSCALL_64_after_hwframe
which belongs to the cache ip_fib_alias of size 56
Triggering the error path needs CAP_NET_ADMIN and a registered fib
notifier that can reject a route; a netdevsim device whose IPv4 FIB
resource is exhausted is enough.
Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already
does for a fib_alias removed from the trie. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate RX frame length in p54_rx_eeprom_readback()
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed
attribute table itself instead of calling ip_valid_fib_dump_req(). The
RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is
present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no
RTA_OIF hits a NULL dereference.
RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without
CAP_NET_ADMIN, so an unprivileged user can trigger it.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189)
Call Trace:
mpls_dump_routes (net/mpls/af_mpls.c:2236)
netlink_dump (net/netlink/af_netlink.c:2331)
__netlink_dump_start (net/netlink/af_netlink.c:2446)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7033)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1345)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
__sock_sendmsg (net/socket.c:790)
____sys_sendmsg (net/socket.c:2684)
___sys_sendmsg (net/socket.c:2738)
__sys_sendmsg (net/socket.c:2770)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Skip unset attributes, as ip_valid_fib_dump_req() does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psample: fix info leak in PSAMPLE_ATTR_DATA
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ndisc: fix NULL deref in accept_untracked_na()
accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)
and dereferences idev->cnf.accept_untracked_na without a NULL check,
even though its only caller ndisc_recv_na() already fetched and
NULL-checked idev for the same device.
Both reads of dev->ip6_ptr run in the same RCU read-side critical
section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr
between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()
without the synchronize_net() that orders the unregister path, so the
re-fetch returns NULL and oopses:
BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974)
Read of size 4 at addr 0000000000000364
Call Trace:
<IRQ>
ndisc_recv_na (net/ipv6/ndisc.c:974)
icmpv6_rcv (net/ipv6/icmp.c:1193)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479)
ip6_input_finish (net/ipv6/ip6_input.c:534)
ip6_input (net/ipv6/ip6_input.c:545)
ip6_mc_input (net/ipv6/ip6_input.c:635)
ipv6_rcv (net/ipv6/ip6_input.c:351)
</IRQ>
It is reachable by an unprivileged user via a network namespace.
Pass the caller's already validated idev instead of re-fetching it; the
idev stays alive for the whole RCU critical section, so it is safe even
after dev->ip6_ptr has been cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Support for hardening against JIT spraying
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Enable IBPB flush on BPF JIT allocation
Enable hardening against JIT spraying when Spectre-v2 mitigations are in
use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip
enabling the IBPB flush if the BPF dispatcher is already using a retpoline
sequence.
This hardening applies only when BPF-JIT is in use. Guard the enabling
under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
