| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt/dir3/
open fd on /mnt/dir1
call rmdir(2) on path "/mnt/dir1"
fsync fd
<trigger power failure>
When attempting to mount the filesystem, the log replay will fail with
an -EIO error and dmesg/syslog has the following:
[445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650
[445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm
[445771.627912] BTRFS info (device dm-0): start tree-log replay
[445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5
[445771.629453] memcg:ffff89f400351b00
[445771.629892] aops:btree_aops [btrfs] ino:1
[445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8
[445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00
[445771.635029] page dumped because: eb page dump
[445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir
[445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5
[445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087
[445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[445771.638097] inode generation 3 transid 9 size 16 nbytes 16384
[445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0
[445771.638100] rdev 0 sequence 2 flags 0x0
[445771.638102] atime 1775744884.0
[445771.660056] ctime 1775744885.645502983
[445771.660058] mtime 1775744885.645502983
[445771.660060] otime 1775744884.0
[445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[445771.660064] index 0 name_len 2
[445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34
[445771.660068] location key (259 1 0) type 2
[445771.660070] transid 9 data_len 0 name_len 4
[445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34
[445771.660076] location key (257 1 0) type 2
[445771.660077] transid 9 data_len 0 name_len 4
[445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[445771.660079] location key (257 1 0) type 2
[445771.660080] transid 9 data_len 0 name_len 4
[445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34
[445771.660082] location key (259 1 0) type 2
[445771.660083] transid 9 data_len 0 name_len 4
[445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160
[445771.660086] inode generation 9 transid 9 size 8 nbytes 0
[445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0
[445771.660088] rdev 0 sequence 2 flags 0x0
[445771.660089] atime 1775744885.641174097
[445771.660090] ctime 1775744885.645502983
[445771.660091] mtime 1775744885.645502983
[445771.660105] otime 1775744885.641174097
[445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14
[445771.660107] index 2 name_len 4
[445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34
[445771.660109] location key (2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely". |
| In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use kzalloc to zero-initialize security descriptor buffer
Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces
to le16") split struct smb_acl's __le32 num_aces field into __le16
num_aces and __le16 reserved. The reserved field corresponds to Sbz2
in the MS-DTYP ACL wire format, which must be zero [1].
When building an ACL descriptor in build_sec_desc(), we are using a
kmalloc()'ed descriptor buffer and writing the fields explicitly using
le16() writes now. This never writes to the 2 byte reserved field,
leaving it as uninitialized heap data.
When the reserved field happens to contain non-zero slab garbage,
Samba rejects the security descriptor with "ndr_pull_security_descriptor
failed: Range Error", causing chmod to fail with EINVAL.
Change kmalloc() to kzalloc() to ensure the entire buffer is
zero-initialized.
[1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix a potential clc buffer length underflow
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss()
Sashiko points out there are two bugs here in the error unwind flow, both
related to how the WQ table is unwound.
First there is a double i-- on the first failure path due to the while loop
having a i--, remove it.
Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not
undone due to the above i--. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix memory leak on ulpi_register() error paths
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: reject zero shift in nft_bitwise
Reject zero shift operands for nft_bitwise left and right shift
expressions during initialization.
The carry propagation logic computes the carry from the adjacent 32-bit
word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this
into a 32-bit shift, which is undefined behaviour.
Reject zero shift operands in the control plane, alongside the existing
check for values greater than or equal to 32, so malformed rules never
reach the packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: raise barrier before state machine transition
Move the barrier raise operation before calling llbitmap_state_machine()
in both llbitmap_start_write() and llbitmap_start_discard(). This
ensures the barrier is in place before any state transitions occur,
preventing potential race conditions where the state machine could
complete before the barrier is properly raised. |
