Export limit exceeded: 419920 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1101 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-5372 | 2 Libssh, Redhat | 9 Libssh, Enterprise Linux, Openshift and 6 more | 2026-11-05 | 5 Medium |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. | ||||
| CVE-2025-5351 | 2 Libssh, Redhat | 5 Libssh, Enterprise Linux, Openshift and 2 more | 2026-11-05 | 6.5 Medium |
| A flaw was found in the key export functionality of libssh. The issue occurs in the internal function responsible for converting cryptographic keys into serialized formats. During error handling, a memory structure is freed but not cleared, leading to a potential double free issue if an additional failure occurs later in the function. This condition may result in heap corruption or application instability in low-memory scenarios, posing a risk to system reliability where key export operations are performed. | ||||
| CVE-2025-5278 | 1 Redhat | 9 Cert Manager, Cost Management, Discovery and 6 more | 2026-11-05 | 4.4 Medium |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. | ||||
| CVE-2025-5222 | 2 Redhat, Unicode | 6 Enterprise Linux, Openshift, Rhel E4s and 3 more | 2026-11-05 | 7 High |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. | ||||
| CVE-2025-4969 | 1 Redhat | 2 Enterprise Linux, Rhel Els | 2026-11-05 | 6.5 Medium |
| A vulnerability was found in the libsoup package. This flaw stems from its failure to correctly verify the termination of multipart HTTP messages. This can allow a remote attacker to send a specially crafted multipart HTTP body, causing the libsoup-consuming server to read beyond its allocated memory boundaries (out-of-bounds read). | ||||
| CVE-2025-26466 | 4 Canonical, Debian, Openbsd and 1 more | 6 Ubuntu Linux, Debian Linux, Openssh and 3 more | 2026-11-05 | 5.9 Medium |
| A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack. | ||||
| CVE-2025-26465 | 4 Debian, Netapp, Openbsd and 1 more | 10 Debian Linux, Active Iq Unified Manager, Ontap and 7 more | 2026-11-05 | 6.8 Medium |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. | ||||
| CVE-2025-2784 | 2 Gnome, Redhat | 26 Libsoup, Codeready Linux Builder, Codeready Linux Builder For Arm64 and 23 more | 2026-11-05 | 7 High |
| A flaw was found in libsoup. The package is vulnerable to a heap buffer over-read when sniffing content via the skip_insight_whitespace() function. Libsoup clients may read one byte out-of-bounds in response to a crafted HTTP response by an HTTP server. | ||||
| CVE-2025-2487 | 1 Redhat | 5 Directory Server, Directory Server Eus, Enterprise Linux and 2 more | 2026-11-05 | 4.9 Medium |
| A flaw was found in the 389-ds-base LDAP Server. This issue occurs when issuing a Modify DN LDAP operation through the ldap protocol, when the function return value is not tested and a NULL pointer is dereferenced. If a privileged user performs a ldap MODDN operation after a failed operation, it could lead to a Denial of Service (DoS) or system crash. | ||||
| CVE-2025-11568 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Els | 2026-11-05 | 4.4 Medium |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. | ||||
| CVE-2025-11234 | 1 Redhat | 8 Enterprise Linux, Openshift, Rhel Aus and 5 more | 2026-11-05 | 7.5 High |
| A flaw was found in QEMU. If the QIOChannelWebsock object is freed while it is waiting to complete a handshake, a GSource is leaked. This can lead to the callback firing later on and triggering a use-after-free in the use of the channel. This can be abused by a malicious client with network access to the VNC WebSocket port to cause a denial of service during the WebSocket handshake prior to the VNC client authentication. | ||||
| CVE-2025-10911 | 1 Redhat | 13 Discovery, Enterprise Linux, Enterprise Linux Eus and 10 more | 2026-11-05 | 5.5 Medium |
| A use-after-free vulnerability was found in libxslt while parsing xsl nodes that may lead to the dereference of expired pointers and application crash. | ||||
| CVE-2025-1118 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Els | 2026-11-05 | 4.4 Medium |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. | ||||
| CVE-2025-1125 | 2 Gnu, Redhat | 4 Grub2, Enterprise Linux, Openshift and 1 more | 2026-11-05 | 7.8 High |
| When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections. | ||||
| CVE-2025-0690 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Els | 2026-11-05 | 6.1 Medium |
| The read command is used to read the keyboard input from the user, while reads it keeps the input length in a 32-bit integer value which is further used to reallocate the line buffer to accept the next character. During this process, with a line big enough it's possible to make this variable to overflow leading to a out-of-bounds write in the heap based buffer. This flaw may be leveraged to corrupt grub's internal critical data and secure boot bypass is not discarded as consequence. | ||||
| CVE-2025-0686 | 2 Gnu, Redhat | 4 Grub2, Enterprise Linux, Openshift and 1 more | 2026-11-05 | 6.4 Medium |
| A flaw was found in grub2. When performing a symlink lookup from a romfs filesystem, grub's romfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_romfs_read_symlink() may cause out-of-bounds writes when the calling grub_disk_read() function. This issue may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution by-passing secure boot protections. | ||||
| CVE-2025-0689 | 2 Gnu, Redhat | 4 Grub2, Enterprise Linux, Openshift and 1 more | 2026-11-05 | 7.8 High |
| When reading data from disk, the grub's UDF filesystem module utilizes the user controlled data length metadata to allocate its internal buffers. In certain scenarios, while iterating through disk sectors, it assumes the read size from the disk is always smaller than the allocated buffer size which is not guaranteed. A crafted filesystem image may lead to a heap-based buffer overflow resulting in critical data to be corrupted, resulting in the risk of arbitrary code execution by-passing secure boot protections. | ||||
| CVE-2025-0685 | 2 Gnu, Redhat | 4 Grub2, Enterprise Linux, Openshift and 1 more | 2026-11-05 | 6.4 Medium |
| A flaw was found in grub2. When reading data from a jfs filesystem, grub's jfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_jfs_lookup_symlink() function will write past the internal buffer length during grub_jfs_read_file(). This issue can be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections. | ||||
| CVE-2025-0684 | 2 Gnu, Redhat | 4 Grub2, Enterprise Linux, Openshift and 1 more | 2026-11-05 | 6.4 Medium |
| A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections. | ||||
| CVE-2025-0678 | 2 Gnu, Redhat | 5 Grub2, Enterprise Linux, Openshift and 2 more | 2026-11-05 | 7.8 High |
| A flaw was found in grub2. When reading data from a squash4 filesystem, grub's squash4 fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the direct_read() will perform a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections. | ||||