| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of data blocks and interprets attacker-controlled file content as the next TAR header, which lets a crafted archive inject entries that PharData reports and extracts as if they were genuine. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certificate carrying a non-matching DNS SAN was still accepted when its CN matched the requested peer_name. A certificate trusted by the client for one name can therefore be used to impersonate another. |
| Replaying GSS-TSIG signed UDP messages can result in memory corruption in "`named`". An attacker who can capture a previously signed UDP message can replay it while the negotiated TSIG key is still valid. By also sending crafted queries to a zone the attacker controls, the attacker may potentially achieve remote code execution.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amounts of CPU time and memory during processing.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| A recursive BIND server that receives a query with recursion desired (RD=1) followed by a non-recursive query (RD=0) may exit with an assertion failure, resulting in a denial of service. To be vulnerable, the BIND server must allow recursive queries and have at least two RPZ zones configured: one with the default setting of "recursive-only yes", and the other with "recursive-only no".
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| A flaw was found in libsolv, a dependency-resolution library used by RPM-based package managers such as dnf and zypper to work with .solv repository cache files. When libsolv rewrites a .solv cache file, it reads directory-id values from the file's compressed filelist data without validating that they fall within the expected range. A corrupted or specially crafted .solv cache file (for example, one left in a torn state after an unclean system shutdown) can cause an out-of-bounds memory write when a tool such as dnf, yum, or zypper next processes it. Successful exploitation is expected to result in a crash of the affected tool (denial of service); it is not expected to allow arbitrary code execution because the out-of-bounds write always stores a fixed, non-attacker-controlled value. |
| A flaw was found in libtirpc. A remote attacker can exploit this vulnerability by sending specially crafted PMAPPROC_DUMP replies to a client application that uses the pmap_getmaps() function against an attacker-controlled host. This unbounded decoding can lead to excessive memory and CPU allocation, causing the client process to experience a Denial of Service (DoS) due to resource exhaustion. |
| Out-of-bounds Write vulnerability in Apache HTTP Server's mod_proxy_html with crafted HTTP response bodies.
This issue affects Apache HTTP Server version 2.4.68. |
| CVE-2026-110927 has been marked as a duplicate of CVE-2026-106585. |
| A missing critical step in authentication vulnerability in Apache Tomcat when the JNDI realm was configured with with a non GSSAPI SASL authentication mechanism allowed attackers to authenticate without providing the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| A denial of service vulnerability exists when Microsoft Common Object Runtime Library improperly handles web requests. An attacker who successfully exploited this vulnerability could cause a denial of service against a .NET web application.
A remote unauthenticated attacker could exploit this vulnerability by issuing specially crafted requests to the .NET application.
The update addresses the vulnerability by correcting how the .NET web application handles web requests. |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| Buffer under-read vulnerability in Apache Tomcat meant that a large non-blocking write could result in the response body being split between the current request and the next request received on that connection leading most likely to failure of the second request and possibly leakage of data from the first response to the second.
This issue affects Apache Tomcat: from 11.0.0-M25 through 11.0.26.
Users are recommended to upgrade to version 11.0.27, which fixes the issue. |
| During an upload, curl mishandles HTTP/2 `RST_STREAM` received from the server
(with reason `HTTP_1_1_REQUIRED` or `REFUSED_STREAM`) leading to a use after
free of a `struct Curl_easy` object. |
| A flaw was found in bubblewrap. During sandbox setup, creating files or directories under the new root can follow a parent symlink onto the host via /oldroot, writing attacker-chosen paths outside the sandbox as the launching user. This happens before the sandboxed process starts. This issue is GHSA-pxhw-h44j-8pfx. It is fixed in bubblewrap 0.12.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. |
