| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
unicode: free the map after a grace period
generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and
dereference the unicode map while a pathwalk in rcu mode holds nothing
but rcu_read_lock(). The filesystems that use them, ext4, f2fs and
tmpfs, drop the map with utf8_unload() from ->put_super(), which runs
when the last reference to the mount goes away. A lookup that is still
inside such a filesystem at that point reads a freed map.
With a pathwalk held up in utf8_casefold_hash() while the last reference
to a casefolded tmpfs goes away:
BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950
Read of size 8 at addr ff110001030fe658 by task walker/98
Call Trace:
<TASK>
utf8nlookup+0x74c/0x950
utf8byte+0x160/0x1560
utf8_casefold_hash+0x167/0x230
generic_ci_d_hash+0xdd/0x1c0
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 94:
__kmalloc_cache_noprof+0x249/0x560
utf8_load+0x4e/0x570
shmem_parse_opt_casefold.isra.0+0x92/0x270
[...]
Freed by task 97:
kfree+0x1db/0x5b0
shmem_put_super+0x72/0x170
generic_shutdown_super+0x14c/0x530
kill_anon_super+0x3a/0x60
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
So far that has been hard to hit. umount(2) waits for a grace period
in namespace_unlock() before it drops the mount, so only a mount whose
last reference goes away elsewhere, like the close of a file or a chdir
out of a lazily unmounted directory, can race a walker. So it is
reachable.
Delay the free until a grace period has passed. The map and the data
table it holds a reference to then outlive any pathwalk that found the
superblock before the mount went away. The reference on the data table
module is dropped from the rcu callback as well. utf8-core is built in
whenever CONFIG_UNICODE is set, so there is no module exit that would
have to wait for the callbacks.
Overlayfs points the s_encoding of an overlay at the map of its first
layer without taking a reference of its own. That stays correct. The
layer is held by the overlay, so its map is dropped only after the
overlay is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic->i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one. |
| In the Linux kernel, the following vulnerability has been resolved:
pipe: preserve existing fasync readers on writer setup failure
F_SETFL and FIOASYNC decide whether to invoke ->fasync() before
pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can
therefore both enter the callback.
fasync_helper() allocates before checking for an existing entry. If the
first enable installs both entries, a second enable can update the
reader entry and then fail the allocation for the writer entry. The
error path removes the pre-existing reader entry, clearing FASYNC while
the writer entry remains registered. __fput() then skips ->fasync(), so a
later pipe notification can dereference the freed file or its f_owner.
An unprivileged memory-pressure reproducer triggers a KASAN
slab-use-after-free in send_sigio() through this path.
Keep the reader helper's result and undo the registration only if this
call added it. The pipe mutex serializes changes to both lists, so a
failed new registration still removes its reader, while a failed
duplicate preserves the existing registrations and FASYNC. Successful
duplicate enables continue to update fa_fd as before. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
<TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the eviction fence until the last handle is closed
amdgpu_gem_object_close() detaches the user queue eviction fence from
the BO before it checks bo_va->ref_count, so closing any handle of a BO
removes the fence, even when the file still has another handle to the
BO and the bo_va with its GPU mappings stays. The BO can then be evicted
without suspending the user queues of the file, which keep accessing it
through mappings that are only marked for update.
Seen on navi31 with a SDMA user queue: a BO opened twice in the same
file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second
handle is closed (traced attach/detach of the fence):
attach bo=ffff8c78a6c84c00
GEM_CLOSE handle=7
detach bo=ffff8c78a6c84c00
while handle 6 and the mapping are still in use.
Only detach the fence when the last reference to the bo_va goes away,
matching amdgpu_gem_object_open(), which attaches it only when the
bo_va is created. With this the fence stays until the file is closed.
(cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
| Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 159 and Thunderbird 159. |
| SQLite before 3.54.0 contains a use-after-free vulnerability in the R-Tree extension that allows attackers to make applications use freed heap memory by manipulating the %_node shadow table. Attackers can supply a database declaring %_node WITHOUT ROWID or with a RAISE(IGNORE) trigger so nodeWrite() hashes nodes as 0, crashing the process after node splits. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. |
| An invalid pointer dereference vulnerability exists in the vtkPNGReader::vtkPNGReaderUpdate2 functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability. |
| An invalid pointer dereference vulnerability exists in the vtkPNGReader::ExecuteInformation functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| Use-after-free in the Networking: DNS component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| Use-after-free in the Graphics component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
