| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix readahead reclaim deadlock
Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()). |
| OpenDJ is an LDAPv3 compliant directory service. OpenDJ prior to 4.9.3 contains a denial-of-service (DoS) vulnerability that causes the server to become unresponsive to all LDAP requests without crashing or restarting. This issue occurs when an alias loop exists in the LDAP database. If an ldapsearch request is executed with alias dereferencing set to "always" on this alias entry, the server stops responding to all future requests. Fortunately, the server can be restarted without data corruption. This vulnerability is fixed in 4.9.3. |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. |
| Loop with unreachable exit condition ('infinite loop') for some Intel(R) Platform within Ring 0: Kernel may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1. |
| In GNOME Shell through 45.7, a portal helper can be launched automatically (without user confirmation) based on network responses provided by an adversary (e.g., an adversary who controls the local Wi-Fi network), and subsequently loads untrusted JavaScript code, which may lead to resource consumption or other impacts depending on the JavaScript code's behavior. |
| A vulnerability in the management and VPN web servers of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability is due to improper validation of user-supplied input on an interface with VPN web services. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on an affected device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. |
| An improper input neutralization vulnerability in the management web interface of the Palo Alto Networks PAN-OS® software enables a malicious authenticated read-write administrator to impersonate another legitimate authenticated PAN-OS administrator.
The attacker must have network access to the management web interface to exploit this issue. You greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue does not affect Cloud NGFW and all Prisma® Access instances. |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. |
| Tokens in CTFd used for account activation and password resetting can be used interchangeably for these operations. When used, they are sent to the server as a GET parameter and they are not single use, which means, that during token expiration time an on-path attacker might reuse such a token to change user's password and take over the account. Moreover, the tokens also include base64 encoded user email.
This issue impacts releases up to 3.7.4 and was addressed by pull request 2679 https://github.com/CTFd/CTFd/pull/2679 included in 3.7.5 release. |
| Azle is a WebAssembly runtime for TypeScript and JavaScript on ICP. Calling `setTimer` in Azle versions `0.27.0`, `0.28.0`, and `0.29.0` causes an immediate infinite loop of timers to be executed on the canister, each timer attempting to clean up the global state of the previous timer. The infinite loop will occur with any valid invocation of `setTimer`. The problem has been fixed as of Azle version `0.30.0`. As a workaround, if a canister is caught in this infinite loop after calling `setTimer`, the canister can be upgraded and the timers will all be cleared, thus ending the loop. |
| In some circumstances, when DNSdist is configured to use the nghttp2 library to process incoming DNS over HTTPS queries, an attacker might be able to cause a denial of service by crafting a DoH exchange that triggers an unbounded I/O read loop, causing an unexpected consumption of CPU resources. |
| Webserver crash caused by scanning on TCP port 80 in Softing Industrial Automation GmbH gateways and switch.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| While assignment of a user to a team (bracket) in CTFd should be possible only once, at the registration, a flaw in logic implementation allows an authenticated user to reset it's bracket and then pick a new one, joining another team while a competition is already ongoing.
This issue impacts releases from 3.7.0 up to 3.7.4 and was addressed by pull request 2636 https://github.com/CTFd/CTFd/pull/2636 included in 3.7.5 release. |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.
This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. |
| Stored cross-site scripting (XSS) vulnerability in the LMT Dashboard of the Perx Customer Engagement & Loyalty Platform allows an authenticated attacker to execute arbitrary JavaScript code in a victim's browser. The vulnerability is due to improper sanitization of SVG file uploads. An attacker can upload a malicious SVG file containing a script payload to a campaign. When another user views this image on the public LMT microsite, the script executes, which can lead to session hijacking, data theft, or other unauthorized actions.This issue affects Customer Engagement & Loyalty Platform before 4.617.4. |
