| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid memory leak in f2fs_rename()
syzbot reported a f2fs bug as below:
BUG: memory leak
unreferenced object 0xffff888127f70830 (size 16):
comm "syz.0.23", pid 6144, jiffies 4294943712
hex dump (first 16 bytes):
3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9..
backtrace (crc 925f8a80):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4520 [inline]
slab_alloc_node mm/slub.c:4844 [inline]
__do_kmalloc_node mm/slub.c:5237 [inline]
__kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250
kmalloc_noprof include/linux/slab.h:954 [inline]
fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364
f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143
f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961
f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308
vfs_rename+0x7ff/0x1250 fs/namei.c:6026
filename_renameat2+0x4f4/0x660 fs/namei.c:6144
__do_sys_renameat2 fs/namei.c:6173 [inline]
__se_sys_renameat2 fs/namei.c:6168 [inline]
__x64_sys_renameat2+0x59/0x80 fs/namei.c:6168
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux
label during whiteout initialization"), we added a call to
f2fs_setup_filename() without a matching call to f2fs_free_filename(),
fix it. |
| A vulnerability in the handling of the embryonic connection limits in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause incoming TCP SYN packets to be dropped incorrectly.
This vulnerability is due to improper handling of new, incoming TCP connections that are destined to management or data interfaces when the device is under a TCP SYN flood attack. An attacker could exploit this vulnerability by sending a crafted stream of traffic to an affected device. A successful exploit could allow the attacker to prevent all incoming TCP connections to the device from being established, including remote management access, Remote Access VPN (RAVPN) connections, and all network protocols that are TCP-based. This results in a denial of service (DoS) condition for affected features. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Drain deferred trigger frees if kthread creation fails
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either. |
| This issue was addressed by improved management of object lifetimes. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An attacker may be able to cause unexpected app termination. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: fix memory leak in __mmap_region()
commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare
swaps the file") handled the success path by skipping get_file() via
file_doesnt_need_get, but missed the error path.
When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls
shmem_zero_setup_desc() which allocates a new shmem file to back the
mapping. If __mmap_new_vma() subsequently fails, this replacement
file is never fput()'d - the original is released by
ksys_mmap_pgoff(), but nobody releases the new one.
Add fput() for the swapped file in the error path.
Reproducible with fault injection.
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x164/0x1f0
should_fail_ex+0x525/0x650
should_failslab+0xdf/0x140
kmem_cache_alloc_noprof+0x78/0x630
vm_area_alloc+0x24/0x160
__mmap_region+0xf6b/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881118aca80 (size 360):
comm "syz.7.14", pid 366, jiffies 4294913255
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M.....
backtrace (crc db0f53bc):
kmem_cache_alloc_noprof+0x3ab/0x630
alloc_empty_file+0x5a/0x1e0
alloc_file_pseudo+0x135/0x220
__shmem_file_setup+0x274/0x420
shmem_zero_setup_desc+0x9c/0x170
mmap_zero_prepare+0x123/0x140
__mmap_region+0xdda/0x2660
mmap_region+0x2eb/0x3a0
do_mmap+0xc79/0x1240
vm_mmap_pgoff+0x252/0x4c0
ksys_mmap_pgoff+0xf8/0x120
__x64_sys_mmap+0x12a/0x190
do_syscall_64+0xa9/0x580
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails
damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow
the kdamond is stopped before the damon_call(). It could happen, for
example, when te damon context was made for monitroing of a virtual
address processes, and the process is terminated immediately, before the
damon_call() invocation. In the case, the dyanmically allocated
repeat_call_control is not deallocated and leaked.
Fix the leak by deallocating the repeat_call_control under the
damon_call() failure.
This issue is discovered by sashiko [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: deallocate damon_call() failure leaking damon_ctx
damon_stat_start() always allocates the module's damon_ctx object
(damon_stat_context). Meanwhile, if damon_call() in the function fails,
the damon_ctx object is not deallocated. Hence, if the damon_call() is
failed, and the user writes Y to “enabled” again, the previously
allocated damon_ctx object is leaked.
This cannot simply be fixed by deallocating the damon_ctx object when
damon_call() fails. That's because damon_call() failure doesn't guarantee
the kdamond main function, which accesses the damon_ctx object, is
completely finished. In other words, if damon_stat_start() deallocates
the damon_ctx object after damon_call() failure, the not-yet-terminated
kdamond could access the freed memory (use-after-free).
Fix the leak while avoiding the use-after-free by keeping returning
damon_stat_start() without deallocating the damon_ctx object after
damon_call() failure, but deallocating it when the function is invoked
again and the kdamond is completely terminated. If the kdamond is not yet
terminated, simply return -EAGAIN, as the kdamond will soon be terminated.
The issue was discovered [1] by sashiko. |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DML). Supported versions that are affected are 8.0.0-8.0.45, 8.4.0-8.4.8 and 9.0.0-9.6.0. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix admin queue leak on controller reset
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/queue: Call fini on exec queue creation fail
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
(cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079) |
| libsixel 1.8.1 has a memory leak in sixel_decoder_decode in decoder.c, image_buffer_resize in fromsixel.c, and sixel_decode_raw in fromsixel.c. |
| libsixel 1.8.1 has a memory leak in sixel_allocator_new in allocator.c. |
| Every uncached /avatar/:hash request spawns a goroutine that refreshes the Gravatar image. If the refresh sits in the 10-slot worker queue longer than three seconds, the handler times out and stops listening for the result, so that goroutine blocks forever trying to send on an unbuffered channel. Sustained traffic with random hashes keeps tripping this timeout, so goroutine count grows linearly, eventually exhausting memory and causing Grafana to crash on some systems. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config()
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
