Export limit exceeded: 421176 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1948 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53320 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy] | ||||
| CVE-2026-53036 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced. | ||||
| CVE-2026-53312 | 1 Linux | 1 Linux Kernel | 2026-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Remove overflows on the invalidation path Since RISC-V supports a sign extended page table it should support a gather->end of ULONG_MAX, but if this happens it will infinite loop because of the overflow. Also avoid overflow computing the length by moving the +1 to the other side of the < | ||||
| CVE-2026-44736 | 1 Opf | 1 Openproject | 2026-06-27 | 6.5 Medium |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, the GET /api/v3/relations endpoint allows any authenticated user to retrieve relations — and the subject (title) of work packages they have no permission to view — by supplying an arbitrary work package ID in the involved, fromId, or toId filter. This bypasses the Relation.visible scope due to a flawed performance optimization in RelationQuery. This vulnerability is fixed in 17.4.0. | ||||
| CVE-2026-53197 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state() iptfs_destroy_state() calls hrtimer_cancel() while holding a spinlock that the timer callback also acquires, leading to an ABBA deadlock on SMP systems. For the output timer (iptfs_timer): - iptfs_destroy_state() holds x->lock, calls hrtimer_cancel() - iptfs_delay_timer() callback takes x->lock For the drop timer (drop_timer): - iptfs_destroy_state() holds drop_lock, calls hrtimer_cancel() - iptfs_drop_timer() callback takes drop_lock Both timers use HRTIMER_MODE_REL_SOFT, so their callbacks run in softirq context. When hrtimer_cancel() is called for a soft timer that is currently executing on another CPU, hrtimer_cancel_wait_running() spins on softirq_expiry_lock -- the same lock held by the softirq running the callback. If the callback is blocked waiting for the spinlock held by the caller of hrtimer_cancel(), a circular dependency forms: CPU 0: holds lock_A -> waits for softirq_expiry_lock CPU 1: holds softirq_expiry_lock -> waits for lock_A Fix by calling hrtimer_cancel() before acquiring the respective locks. hrtimer_cancel() is safe to call without holding any lock and will wait for any in-progress callback to complete. For the output timer, the lock is still acquired afterwards to drain the packet queue. For the drop timer, the lock/unlock pair is removed entirely since it only existed to serialize with the timer callback, which hrtimer_cancel() already guarantees. Found by source code audit. | ||||
| CVE-2026-9222 | 1 Shenzhen I365 | 1 Setracker2 Parental Control App (android) Package Com.tgelec.setracker | 2026-06-26 | 8.1 High |
| Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior only require the password hash when authenticating with backend services from the client. This could allow an attacker, who knows the hash, to authenticate and gain full access. | ||||
| CVE-2026-4598 | 1 Kjur | 1 Jsrsasign | 2026-06-25 | 7.5 High |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Infinite loop via the bnModInverse function in ext/jsbn2.js when the BigInteger.modInverse implementation receives zero or negative inputs, allowing an attacker to hang the process permanently by supplying such crafted values (e.g., modInverse(0, m) or modInverse(-1, m)). | ||||
| CVE-2025-71319 | 3 Image-size, Image Sizes Project, Redhat | 6 Image-size, Image Sizes, Discovery and 3 more | 2026-06-23 | 7.5 High |
| image-size through 2.0.2 contains a denial of service vulnerability that allows remote attackers to permanently block the Node.js event loop by supplying a specially crafted image buffer with a zero-valued size field in a recognized box-type. Attackers can trigger an infinite loop in the JXL or HEIF image parsers by providing a crafted image containing a box with a size of zero, causing the offset to never advance and permanently hanging the application. | ||||
| CVE-2026-50171 | 1 Angular | 1 Angular | 2026-06-23 | 6.1 Medium |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23, a Denial of Service (DoS) vulnerability exists in the @angular/common package of Angular. The formatNumber function, which is also utilized by DecimalPipe, PercentPipe, and CurrencyPipe, does not properly validate the upper bounds of the digitsInfo parameter. Specifically, the minimum and maximum fraction digits parsed from the digitsInfo string (e.g., 1.2-4) are converted to integers and used without limits. When parsing a maliciously crafted digitsInfo string with excessively large fraction digit values (e.g., 1.200000000-200000000), the internal roundNumber function attempts to pad the digits array to match the requested fraction size. This results in an unbounded loop that repeatedly pushes elements into an array. This vulnerability is fixed in 22.0.0-rc.2, 21.2.15, 20.3.22, and 19.2.23. | ||||
| CVE-2026-48986 | 1 Mcdope | 1 Pam Usb | 2026-06-22 | 4.7 Medium |
| pam_usb provides hardware authentication for Linux using removable media. In pam_usb 0.9.1 and earlier, usb_get_process_parent_id() can cause an infinite loop DoS because it does not initialize *ppid on failure. In pusb_local_login(), the same variable is reused as input and output in a process-tree while loop; if /proc/<pid>/stat cannot be read (for example, when an ancestor process exits during authentication), the PID is not updated and the loop does not terminate. This hangs the authenticating process (such as sudo, sshd, or login) until it is forcibly terminated. This issue has been fixed in version 0.9.2. | ||||
| CVE-2026-46314 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject empty multisync extension to prevent infinite loop v3d_get_extensions() walks a userspace-provided singly-linked list of ioctl extensions without any bound on the chain length. A local user can craft a self-referential extension (ext->next == &ext) with zero in_sync_count and out_sync_count, which bypasses the existing duplicate- extension guard: if (se->in_sync_count || se->out_sync_count) return -EINVAL; The guard never fires because v3d_get_multisync_post_deps() returns immediately when count is zero, leaving both fields at zero on every iteration. The result is an infinite loop in kernel context, blocking the calling thread and pegging a CPU core indefinitely. Fix this by rejecting a multisync extension where both in_sync_count and out_sync_count are zero in v3d_get_multisync_submit_deps(). An empty multisync carries no synchronization information and serves no useful purpose, so returning -EINVAL for such an extension is the correct defense against this attack vector. | ||||
| CVE-2026-55199 | 1 Libssh2 | 1 Libssh2 | 2026-06-18 | 5.9 Medium |
| libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops. | ||||
| CVE-2026-46041 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review. | ||||
| CVE-2026-46009 | 1 Linux | 1 Linux Kernel | 2026-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient. | ||||
| CVE-2026-53841 | 1 Openclaw | 1 Openclaw | 2026-06-17 | 6.1 Medium |
| OpenClaw before 2026.5.12 contains a cross-site scripting vulnerability in exported session HTML that preserves unsafe javascript: and data: links in generated content. Attackers can execute browser-side scripts if a trusted operator opens the exported file and activates a malicious link. | ||||
| CVE-2026-48591 | 1 Pragdave | 1 Earmark | 2026-06-17 | N/A |
| Improper Neutralization of Script in Attributes in a Web Page vulnerability in pragdave earmark allows stored cross-site scripting via unescaped HTML attribute values. 'Elixir.Earmark.Transform':_make_att1/2 in lib/earmark/transform.ex splices attribute values verbatim between two literal " bytes: [" ", name, "=\"", value, "\""]. Text nodes are routed through the existing escape function which encodes " as ", but attribute values never visit that path. A markdown link whose URL or title contains a bare " closes the attribute early and lets the trailing bytes be parsed by the browser as fresh HTML attributes. For example, [click](http://example.com/?a=x" onerror="alert(1)) renders as <a href="http://example.com/?a=x" onerror="alert(1)">click</a>, executing arbitrary JavaScript in the victim's browser. The earmark library is no longer maintained and has been retired on Hex. No patched version will be released. All releases from 1.4.1 onward are affected, and users should migrate to a maintained Markdown library such as MDEx. This issue affects earmark from 1.4.1 onward. | ||||
| CVE-2026-46061 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in. | ||||
| CVE-2026-45669 | 1 Nuxt | 1 Nuxt | 2026-06-15 | 5.4 Medium |
| Nuxt is an open-source web development framework for Vue.js. From versions 3.4.3 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6, navigateTo() with external: true generates a server-side HTML redirect body containing a <meta http-equiv="refresh"> tag. The destination URL is only sanitized by replacing " with %22, leaving <, >, &, and ' unencoded. An attacker who can influence the URL passed to navigateTo(url, { external: true }) can break out of the content="…" attribute and inject arbitrary HTML/JavaScript that executes under the application's origin. This issue has been patched in versions 3.21.6 and 4.4.6. | ||||
| CVE-2026-53722 | 1 Nuxt | 1 Nuxt | 2026-06-15 | 5.4 Medium |
| Nuxt is an open-source web development framework for Vue.js. Prior to versions 3.21.7 and 4.4.7, <NuxtLink> did not validate the URL scheme of values bound to its to or href props before rendering them into the href attribute of the underlying <a> element. When an application binds attacker-controlled input (a query parameter, a CMS field, a user-supplied profile URL) to <NuxtLink :to> or :href, the attacker can supply a javascript: or vbscript: URL that is reflected verbatim into the rendered markup. Clicking the link executes the supplied script in the origin of the Nuxt application, resulting in reflected DOM-based cross-site scripting. A data:text/html,... payload reflected through the same sink does not execute in the application's origin but enables a same-tab phishing surface anchored to a legitimate application link. The same value was exposed to consumers of the component's custom slot via the href and route.href props, so applications that re-bind those values to their own anchors were affected identically. This issue has been patched in versions 3.21.7 and 4.4.7. | ||||
| CVE-2026-48733 | 1 Imagemagick | 1 Imagemagick | 2026-06-11 | 4.7 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-49 and 7.1.2-24, an infinite loop in the subimage-search operation can happen when using a crafted image. This issue has been patched in versions 6.9.13-49 and 7.1.2-24. | ||||