| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthenticated
buffer overflow vulnerability exists in IEEE8021x_upload.cgi in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient bounds checking when parsing filename values in multipart upload
data. A remote attacker may exploit this vulnerability by sending a crafted
upload request with overly long input, causing memory corruption and resulting
in a denial of service. |
| An unauthenticated
stack-based buffer overflow vulnerability exists in ssvr in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient bounds checking when processing RTSP custom authentication data. A
remote attacker may exploit this vulnerability by sending a crafted RTSP
request, resulting in memory corruption, denial of service, or potentially
arbitrary code execution. |
| Unauthenticated remote information disclosure vulnerability in Ollama's model quantization engine allows an attacker to read and exfiltrate the server's heap memory, potentially leading to sensitive data exposure, further compromise, and stealthy persistence. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.6.1, a local process in the same interactive Windows session can send a malformed WM_COPYDATA message to Notepad++ using the COPYDATA_FULL_CMDLINE path. The handler appears to process COPYDATASTRUCT.lpData as an unbounded NUL-terminated wchar_t* instead of enforcing COPYDATASTRUCT.cbData. This vulnerability is fixed in 8.9.6.1. |
| A vulnerability was found in seladb PcapPlusPlus 25.05. The affected element is the function parse_by_block_type of the file light_pcapng.c of the component LightPcapNg Parser. Performing a manipulation of the argument captured_packet_length results in heap-based buffer overflow. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is described as difficult. The exploit has been made public and could be used. |
| libxml2 is vulnerable to multiple stack-based buffer overflows in the xmlcatalog utility when running in --shell mode. The usershell() function processes user input using fixed-size stack buffers without proper bounds checking.
By supplying an overly long input line, an attacker can overflow internal buffers (command, arg, and argv) during input parsing. This results in memory corruption within the stack frame.
Successful exploitation may cause a crash or potentially allow arbitrary code execution in the context of the xmlcatalog process.
This issue has been fixed in the commit c2e233fc.
NOTE:
The maintainers of this project did not agree that this issue is a vulnerability and considered it a bug. |
| A vulnerability was determined in seladb PcapPlusPlus 25.05. The impacted element is the function pcpp::SSLClientHelloMessage::getHandshakeVersion of the file Packet++/src/SSLHandshake.cpp of the component TLS Hello Handler. Executing a manipulation of the argument handshakeVersion can lead to heap-based buffer overflow. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitability is regarded as difficult. The exploit has been publicly disclosed and may be utilized. This patch is called 98e671010bc7c87b95898c22ae289220ae92542b. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was identified in seladb PcapPlusPlus 25.05. This affects the function pcpp::TelnetLayer::getSubCommand of the file Packet++/src/TelnetLayer.cpp of the component Telnet Subnegotiation Packet Handler. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The exploit is publicly available and might be used. The identifier of the patch is 98e671010bc7c87b95898c22ae289220ae92542b. It is recommended to apply a patch to fix this issue. |
| A flaw has been found in Edimax EW-7478APC 1.04. This issue affects the function formUSBAccount of the file /goform/formUSBAccount of the component POST Request Handler. This manipulation of the argument UserName/Password causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This affects the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()
In f2fs_sbi_show(), the extension_list, extension_count and
hot_ext_count are read without holding sbi->sb_lock. If a concurrent
sysfs store modifies the extension list via f2fs_update_extension_list(),
the show path may read inconsistent count and array contents, potentially
leading to out-of-bounds access or displaying stale data.
Fix this by holding sb_lock around the entire extension list read
and format operation. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| A security vulnerability has been detected in Tenda JD12L 16.03.53.23. Impacted is the function formSetPPTPServer of the file /goform/SetPptpServerCfg. Such manipulation of the argument startIp leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was identified in Wavlink WL-NU516U1-A M16U1_V240425. The impacted element is the function sub_407504 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. Such manipulation of the argument Guest_ssid leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability has been found in Edimax EW-7478APC 1.04. This impacts the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. Such manipulation of the argument L2TPUserName leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Push kjump return address even for non-kjump kexec
The version of purgatory code shipped by kexec-tools attempts to look above
the top of its stack to find a return address for a kjump, even in a non-kjump
kexec.
After the commit in Fixes: the word above the stack might not be there,
leading to a fault (which is at least now caught by my exception-handling code
in kexec).
That commit fixed things for the actual kjump path, but no longer
"gratuitously" pushes the unused return address to the stack in the non-kjump
path. Put that *back* in the non-kjump path, to prevent purgatory from
crashing when trying to access it. |
| A vulnerability was found in Edimax EW-7478APC 1.04. Affected is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Tenda JD12L 16.03.53.23. The affected element is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet. Performing a manipulation of the argument shareSpeed results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. |
| A security flaw has been discovered in Investintech SlimPDFReader up to 2.0.14. Affected by this issue is the function SlimPDFReader!Investintech::PCV::TeighaDo+0x25cde0 of the file SlimPDFReader.exe of the component PDF File Handler. Performing a manipulation results in out-of-bounds read. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| Eclipse tinydtls before commit b3efd41ad111a4920f599f51ffa4f5e9f1e72221 contains an out-of-bounds read vulnerability in the check_server_certificate() function that allows unauthenticated attackers to trigger reads beyond valid buffer boundaries by crafting a Certificate handshake message with a specific fragment_length value. Attackers can exploit missing buffer length validation before uint24 reads, memcmp, and memcpy operations during DTLS epoch 0 on both client and server paths to cause denial of service on memory-constrained devices. |
