| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix double completion race in nci_data_exchange_complete
nci_close_device() and nci_rx_work can both call
nci_data_exchange_complete() concurrently. After commit 4527025d440ce8
("nfc: nci: fix circular locking dependency in nci_close_device") moved
flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock),
rx_work is no longer serialized with the explicit completion call in the
close path. Both callers read the non-NULL callback pointer and invoke
rawsock_data_exchange_complete(), which calls sock_put() -- but only one
sock_hold() was taken, so the second sock_put() underflows the refcount
and frees the socket while it is still in use.
Replace the bare clear_bit(NCI_DATA_EXCHANGE) with
test_and_clear_bit() so that only the first caller proceeds to invoke
the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Restore locking around msi_page_list
Unlike a group's default domain, which is always freshly allocated
and privately owned (iommu_group_alloc_default_domain()), VFIO type1's
legacy container merges any newly attached group into an existing
domain whenever their iommu_ops and cache-coherency enforcement match.
iommu_dma_get_msi_page() only asserts the caller's own group mutex is
held (iommu_group_mutex_assert()). On an IOMMU that publishes
IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned
through the legacy container can have their guest drivers probe and
allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands
on a different device fd and group mutex, but both devices' domains
are the same merged domain, so both can enter
iommu_dma_get_msi_page() concurrently and corrupt msi_page_list.
commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a
generic operation") dropped the prior msi_prepare_lock on the
reasoning that "each iommu_domain is unique to a group," which holds
for default domains but not this VFIO type1 case. Restore the static
lock, since it's only guarding a corner case and will likely never
be contended.
iommufd avoids the equivalent problem by having its own callers
(iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever
reaching the shared list. VFIO type1 can't mirror that since it
dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: fix teardown of an adopted proto on insert-race loss
In tc_new_tfilter() the create branch sets tp_created = 1 before calling
tcf_chain_tp_insert_unique(). When the caller loses the race (another
request inserted a proto at the same chain/prio first), insert_unique()
destroys the caller's own tp_new and returns the winner's proto with an
extra reference. tp_created was never cleared, so the loser's errout
path treated the winner's live proto as its own and called
tcf_chain_tp_delete_empty() on it, silently unlinking an active
classifier that the winning request already advertised via
RTM_NEWTFILTER.
Track the outcome of the insert step in a single tri-state variable so
each errout path reacts correctly:
- TP_NOT_CREATED: no proto created; pursue the old path.
- TP_CREATED: proto inserted successfully; same code path as before.
- TP_NOT_OWNED: New - lost the insert race; tp is another request's proto
(chain ref already released by tp_new's destroy)
Both errout reactions are single expressions derived from the state.
This fix is motivated by the Sashiko's automated review of Patch
(net/sched: cls_api: Always acquire rtnl_lock when destroying locked
classifiers) [1][2]. The review identified the silent-unlink behaviour of
an adopted proto's teardown when a request loses the
tcf_chain_tp_insert_unique() race.
[1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
[2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: use system_freezable_wq for init complete work
schedule_delayed_work() uses system_wq, which is non-freezable, allowing
regulator_init_complete_work to run concurrently with system suspend. This
work fires ~30s after boot to disable unused regulators via I2C. When it
races with PM suspend, the I2C adapter may already be suspended, triggering
a -ESHUTDOWN warning in __i2c_transfer():
WARNING: ... at __i2c_transfer+0x36c/0x3c8
Call trace:
__i2c_transfer
i2c_transfer
regmap_i2c_write
_regmap_update_bits
regulator_disable_regmap
_regulator_do_disable
regulator_late_cleanup
regulator_init_complete_work_function
process_one_work
Switch to system_freezable_wq so the work is frozen before any device
is suspended, eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear
mt7915_remove_interface() cleared the wcid mask bit with no lock held and
before clearing the RCU wcid pointer. The mask is a non-atomic RMW shared
with the allocators, which all run under dev->mt76.mutex; on DBDC the two
wiphys share one mt76_dev, so this raced add_interface/sta_add on the
other band and could leak or double-hand-out a wcid. Clearing the bit
before the RCU pointer also let a concurrent allocation reuse the index
and publish its wcid, which the subsequent NULL assignment then wiped.
Move the clear into the existing mutex section, after the RCU pointer is
cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: Prevent crash handling to race with rproc_del()
There's no synchronization between rproc_crash_handler_work() and
rproc_del(), as such it's possible for a driver to be removed while
crash-handler work is scheduled, or even executing - resulting in
use-after-free issues.
To avoid this the scheduled work need to be cancelled and synchronized
against before the removal proceeds.
In order to ensure that this doesn't race with the reporting, and
thereby scheduling new work, a "deleting" flag is introduced. This is
similar to the RPROC_DELETE state that was introduced to ensure that
"start" didn't race with rproc_del(), but the existing mechanism can not
be used as it's valid to call rproc_report_crash() in atomic context -
and the "state" is protected by a mutex.
In the event that work is cancelled the pm_stay_awake() is left
unbalanced and need to be unrolled.
The blocking and cancelling of crash-handler work prior to the actual
rproc_shutdown() call does have the explicit side-effect that crashes
resulting from the shutdown process will not enter the crash-handling
path, and as such will not generate devcoredumps etc. Due to the
existing mutual exclusion between these code paths there's no concrete
reduction in functionality, but further work would be needed to handle
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: use fsdata to track inline data write state and fix race
Instead of checking the live inode state (ext4_has_inline_data(inode)
and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the
write_end handlers, use the fsdata parameter of the address space
operations to explicitly pass down the state in which write_begin
prepared the write.
A concurrent thread (such as ext4_page_mkwrite()) can convert the
inline data to an extent between write_begin and write_end. If this
happens, the write_end handlers would previously miss the inline
write_end path and fall through to extent-based write_end logic.
However, since block buffers were never allocated in write_begin,
this resulted in NULL pointer dereferences or data loss because
folio_buffers(folio) was NULL.
Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating
fsdata as bitwise flags rather than mutually exclusive enums to keep
states of the write path independent. Communicate this state via
fsdata:
1) ext4_write_begin() and ext4_da_write_begin() set the
EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline
write is successfully prepared.
2) On entry, ext4_write_begin() clears the EXT4_WRITE_DATA_INLINE bit
to safely handle VFS retries (where generic_perform_write() bypasses
the fsdata initialization on its retry jump).
3) The write_end handlers perform a bitwise AND to check if the
EXT4_WRITE_DATA_INLINE bit is set and invoke the inline write_end
helper accordingly.
Furthermore, during a buffered write, ext4_write_inline_data_end()
acquires the xattr lock after preparing the write. If a concurrent
page fault (ext4_page_mkwrite()) converts the inline data to an extent
after the write_end handlers check the state but before
ext4_write_inline_data_end() acquires the xattr write lock, the
subsequent check will trigger a kernel panic via
BUG_ON(!ext4_has_inline_data(inode)).
To keep git history working and bisectability clean, replace the
BUG_ON check in ext4_write_inline_data_end() with a graceful error-
handling retry path in this same commit. If the inline data is cleared
after locking the xattr, we safely release all resources (releasing
iloc.bh, unlocking/putting the folio, stopping the active journal
transaction handle) and return 0 (VFS retry) to let the generic write
path retry the operation safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: drain in-flight DIO before buffered write fallback
generic/746 started failing intermittently on ext3 (no-extent inodes).
The test triggers 'Page cache invalidation failure on direct I/O'
warnings and subsequent fsync returns -EIO. Adding a 50ms delay
between ext4_buffered_write_iter() and filemap_write_and_wait_range()
in ext4_dio_write_iter() makes the race almost always reproducible.
On no-extent inodes, DIO writes to holes cannot use unwritten extents,
so ext4_iomap_alloc() leaves m_flags=0 and ext4_map_blocks() returns 0.
The iomap layer then returns -ENOTBLK, causing fallback to buffered I/O.
The fallback path in ext4_dio_write_iter() calls
ext4_buffered_write_iter() which dirties pages, then does flush and
invalidate. However, there's an unprotected window between
ext4_buffered_write_iter() returning (with inode lock released) and
the subsequent flush+invalidate.
Concurrent async DIO completions from other threads can run
kiocb_invalidate_post_direct_write() during this window. If pages have
been re-dirtied, post-invalidation finds dirty pages and triggers the
warning, setting -EIO in the error sequence.
Consider a file with two 4k extents: [hole][written]. Thread A does
DIO to the written extent, while thread B does DIO spanning both:
kworker A (4k DIO, allocated block) kworker B (8k DIO, fallback)
----------------------------------- ----------------------------
inode_lock_shared() inode_lock_shared()
iomap_dio_rw(): iomap_dio_rw():
kiocb_invalidate_pages -> clean iomap_begin -> -ENOTBLK
submit_bio (async) dio->size = 0
inode_unlock_shared() inode_unlock_shared()
[bio pending in block layer] /* fallback: lock released */
ext4_buffered_write_iter()
inode_lock(exclusive)
generic_perform_write()
-> dirty pages [0, 8k]
inode_unlock(exclusive)
/* pages dirty, no lock */
[bio completes] filemap_write_and_wait_range()
iomap_dio_complete() -> flush dirty pages
kiocb_invalidate_post_direct_write() invalidate_mapping_pages()
invalidate_inode_pages2_range()
-> finds dirty page!
-> dio_warn_stale_pagecache()
-> errseq_set(-EIO)
This issue can be triggered through normal I/O paths, not just
intentionally overlapping DIO writes from userspace. For example,
generic/746 uses a loop device where multiple kworkers issue concurrent
I/O to the backing file. Additionally, when block_size < folio_size,
non-overlapping DIO writes that share a large folio can also trigger
the race.
Add inode_dio_wait() in ext4_buffered_write_iter() before
ext4_write_checks() to drain all in-flight DIO. This ensures that
all DIO clears existing pages before submitting IO (via
kiocb_invalidate_pages()), all BIO waits for all DIO to complete
(via inode_dio_wait()), and ext4_write_checks() observes the inode
size after all completed DIO so that ext4_block_zero_eof() does not
race with in-flight DIO, thus eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Drain RCU callbacks during module teardown
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Use acquire/release for queue enabled state
apple_nvme_init_queue() initializes queue state and then marks the queue
enabled. The interrupt and request paths check enabled before using that
queue state.
The old wmb() after WRITE_ONCE(enabled, true) does not publish the
earlier initialization before enabled becomes visible. Use a release store
when enabling the queue and acquire loads when testing it.
Although the shutdown-side enabled accesses are not used for publishing
queue initialization, use helpers for them as well for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
corruption or missed completions.
Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
dax: read holder_ops once in dax_holder_notify_failure()
dax_holder_notify_failure() reads dax_dev->holder_ops twice without
READ_ONCE() -- once for the NULL check and once for the indirect
notify_failure() call. A concurrent fs_put_dax() can clear holder_ops
between the two reads, so the check can observe a non-NULL pointer while
the call dereferences NULL. (kill_dax() also clears holder_ops, but only
after synchronize_srcu(), so it cannot race a reader that is inside
dax_read_lock(); fs_put_dax() does no such synchronization.)
Fetch holder_ops once into a local with READ_ONCE() so the NULL check and
the indirect call observe the same value. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix valid_size extension over a shared writable mapping
When a shared writable mapping has its valid_size extended by a buffered
write or a page fault, exfat zeroes the page-cache gap below the new
valid_size. A store through the mapping can race with this zeroing and be
overwritten.
Fix this by zeroing the gap lazily. Drop ->map_pages so that every first
write fault goes through exfat_page_mkwrite(), which advances valid_size to
cover the faulting page. With fault-around enabled, a store could install a
writable PTE, skip ->page_mkwrite(), and land past valid_size without
advancing it. Extending valid_size one faulting page at a time also leaves
never-written pages in a large mapping alone.
The gap is filled with block granularity, zeroing only the not-uptodate
blocks and preserving blocks that may hold data stored through the mapping.
On the buffered-write path the invalidate lock is held and the gap is
unmapped before zeroing, so a racing store re-faults and, under the inode
lock, completes only after the gap has been zeroed and valid_size covers
it. |
| In the Linux kernel, the following vulnerability has been resolved:
md: scope memalloc_noio to allocation critical sections
Storing a memalloc_noio_save() token in mddev->noio_flags lets one task
save the token and another task restore it. With concurrent suspend sysfs
writes, task A can enter PF_MEMALLOC_NOIO, return to userspace still in
that scope, and later task B can restore A's saved token.
Avoid tying the token lifetime to mddev. Keep mddev_suspend() and
mddev_resume() only responsible for array suspension, and enter
PF_MEMALLOC_NOIO only in the MD paths that allocate memory after the array
has been suspended. Restore the token before resuming the array.
A reproducer repeatedly writes suspend_lo and suspend_hi from concurrent
workers and checks each worker's /proc/self/stat flags before and after the
sysfs write. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call. |
| On affected platforms running Arista EOS, when multiple gRPC Network Security Interface (gNSI) transports are configured, a race condition in the gNSI Authz service may cause a policy rotation to fail silently. An authenticated user whose access was revoked by the new policy may retain unauthorized access to gRPC interfaces. This does not affect Bootz.
This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination. |
