| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An OS command injection vulnerability exists in Russound MBX-PRE-D67F firmware version 3.1.6, allowing unauthenticated attackers to execute arbitrary commands as root via crafted input to the hostname parameter in network configuration requests. This vulnerability stems from improper neutralization of special elements used in an OS command within the network configuration handler, enabling remote code execution with the highest privileges. |
| A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| RestDB's Codehooks.io MCP Server is an MCP server on the Codehooks.io platform. Prior to version 0.2.2, the MCP server is written in a way that is vulnerable to command injection attacks as part of some of its MCP Server tools definition and implementation. This could result in a user initiated remote command injection attack on a running MCP Server. This issue has been patched in version 0.2.2. |
| DjVuLibre is a GPL implementation of DjVu, a web-centric format for distributing documents and images. Prior to version 3.5.29, the MMRDecoder::scanruns method is affected by an OOB-write vulnerability, because it does not check that the xr pointer stays within the bounds of the allocated buffer. This can lead to writes beyond the allocated memory, resulting in a heap corruption condition. An out-of-bounds read with pr is also possible for the same reason. This issue has been patched in version 3.5.29. |
| Thor before 1.4.0 can construct an unsafe shell command from library input. NOTE: this is disputed by the Supplier because "the method that was fixed can only be used with arguments that are controlled by Thor, and there is no way an attacker can take control of those arguments." |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| dedupe is a python library that uses machine learning to perform fuzzy matching, deduplication and entity resolution quickly on structured data. Before commit 3f61e79, a critical severity vulnerability has been identified within the .github/workflows/benchmark-bot.yml workflow, where a issue_comment can be triggered using the @benchmark body. This workflow is susceptible to exploitation as it checkout the ${{ github.event.issue.number }}, which correspond to the branch of the PR manipulated by potentially malicious actors, and where untrusted code may be executed. Running untrusted code may lead to the exfiltration of GITHUB_TOKEN, which in this workflow has write permissions on most of the scopes - in particular the contents one - and could lead to potential repository takeover. This is fixed by commit 3f61e79. |
| A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values.
The entry process of the enforcer container is the monitor
process. When the enforcer container stops, the monitor process checks
whether the consul subprocess has exited. To perform this check, the
monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active.
The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT
are used directly to compose shell commands via popen without
validation or sanitization. This behavior could allow a malicious user
to inject malicious commands through these variables within the enforcer
container. |
| Pearcleaner is a free, source-available and fair-code licensed mac app cleaner. The PearcleanerHelper is a privileged helper tool bundled with the Pearcleaner application. It is registered and activated only after the user approves a system prompt to allow privileged operations. Upon approval, the helper is configured as a LaunchDaemon and runs with root privileges. In versions 4.4.0 through 4.5.1, the helper registers an XPC service (com.alienator88.Pearcleaner.PearcleanerHelper) and accepts unauthenticated connections from any local process. It exposes a method that executes arbitrary shell commands. This allows any local unprivileged user to escalate privileges to root once the helper is approved and active. This issue is fixed in version 4.5.2. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| SonarQube Server and Cloud is a static analysis solution for continuous code quality and security inspection. A command injection vulnerability exists in SonarQube GitHub Action in version 4.0.0 to before version 6.0.0 when workflows pass user-controlled input to the args parameter on Windows runners without proper validation. This vulnerability bypasses a previous security fix and allows arbitrary command execution, potentially leading to exposure of sensitive environment variables and compromise of the runner environment. The vulnerability has been fixed in version 6.0.0. Users should upgrade to this version or later. |
| An out-of-bounds write in VirtIO network device emulation in BitVisor from commit 108df6 (2020-05-20) to commit 480907 (2025-07-06) allows local attackers to cause a denial of service (host hypervisor crash) via a crafted PCI configuration space access. Given it's a heap overflow in a privileged hypervisor context, exploitation may enable arbitrary code execution or guest-to-host privilege escalation. |
| Stalwart is a mail and collaboration server. Versions 0.13.3 and below contain an unbounded memory allocation vulnerability in the IMAP protocol parser which allows remote attackers to exhaust server memory, potentially triggering the system's out-of-memory (OOM) killer and causing a denial of service. The CommandParser implementation enforces size limits on its dynamic buffer in most parsing states, but several state handlers omit these validation checks. This issue is fixed in version 0.13.4. A workaround for this issue is to implement rate limiting and connection monitoring at the network level, however this does not provide complete protection. |
| The StrongDM Windows service incorrectly handled input validation. Authenticated attackers could potentially exploit this leading to privilege escalation. |
| The StrongDM macOS client incorrectly processed JSON-formatted messages. Attackers could potentially modify macOS system configuration by crafting a malicious JSON message. |
