| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Reject incomplete event filter expressions
A non-empty expression normally finishes in predicate_parse()'s inner
loop, which resolves the pending logical operators before jumping to
finalization. If the input ends after an operator, possibly followed by
unary '!' tokens, the outer loop instead falls through with unresolved
operator state.
For example, "common_pid == 1 || common_pid == 2 &&" leaves
prog[0].target equal to -1. The second pass then reads prog[-1] before
the forward-jump check can reject it. Depending on adjacent slab
contents, it can also copy an out-of-bounds word into a branch target
that passes the forward-only check. A self-targeted perf tracepoint
counting event can reach this path through PERF_EVENT_IOC_SET_FILTER.
Reject the outer-loop fallthrough when a predicate has already been
parsed. This ensures that non-empty expressions only reach finalization
after the inner loop has resolved their operators. Keep the existing
no-filter error for input that has no predicates. Add a regression test
for trailing logical operators and unary negations. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Unregister field variable histograms when the command fails
An action that names a field on another event needs that field as a
variable, so create_field_var_hist() registers a second hist trigger on
that event to provide it, and records it in
target_hist_data->field_var_hists[].
If a later part of the same command fails, create_actions() returns an
error and event_hist_trigger_parse() jumps to out_free. The write fails
with -EINVAL and sched_switch gets no trigger, but:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \
events/sched/sched_waking/trigger
# echo 'my_synth u64 lat; int a; int b' >> synthetic_events
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\
>> events/sched/sched_switch/trigger
# cat events/sched/sched_waking/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active]
The second histogram is the one created for 'prio'. It is still active and
still counting.
out_free reaches destroy_field_var_hists(), which frees the
field_var_hists[] entries, but never unregister_field_var_hists(), which is
what removes the triggers and runs only from event_hist_trigger_free(). The
entry is freed and the trigger is left with nothing tracking it.
Unregister the field variable histograms in out_free as well, and record
each one as soon as its trigger is registered rather than after the lookup
that follows it, so no exit can leave a registered trigger untracked. The
entry then belongs to field_var_hists[] and is released by
destroy_field_var_hists(), so freeing it on that exit would be a double
free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
syscall_copy_user_array() copies the buffer argument of faultable
syscalls (write, pwrite64, ...) with __copy_from_user(), which skips
access_ok(). Use copy_from_user() instead so a non-user address is
rejected and the entry is recorded as faulted.
It could be a security concern for machines that trust perf a bit too
much. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in ->hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/wait: don't spin on a stuck overflow list
As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule()
returns right away, before it gets to look at signals or arms the timeout,
for io_cqring_wait() to flush the overflow list. If that doesn't empty the
list, and the CQ ring doesn't hold the number of events the caller wants,
the loop starts over, with the same result. The task spins in the kernel,
and can't be killed.
The assumption is that this can't happen: if CQEs can't be flushed, the
ring is full, and min_events is capped to the size of the ring. But:
- With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It
is stuck on the list if a single one is free, and then the ring holds
less than cq_entries events. A single threaded application that asks
for as many events as the ring has entries never gets out of
io_uring_enter().
- Whether the ring is full is up to the CQ head, which the application
can write to. While one thread waits for events on an empty ring,
another one can move the head back so that the ring looks full and
have a CQE overflow. The waiter can't be stopped any more, not even by
SIGKILL.
Only the application can make room in the CQ ring. Return to it if the
list could not be flushed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, such a callback can invoke
bpf_sys_bpf() from hrtimer softirq context and trigger a
scheduling-while-atomic failure. bpf_sys_close() is exposed through the
same missing context check.
Set .might_sleep on both prototypes so the existing helper-context check
rejects them from timer callbacks and other atomic regions. Calls from the
sleepable main body remain valid. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Postpone kthread startup
There have been various bug reports related to SMP systems hanging
on boot. The reports vary but seem to have some overlap with regard
to missed IPI's during SMP setup. The reports also show that
reverting NBCON console usage allows the bugs to disappear.
The NBCON kthreads for console printing are started very early
during boot using early_initcall(). Since these kthreads are
asynchronously enabling/disabling interrupts during early boot, they
may be interfering with early SMP setup on some hardware platforms.
Starting the console printing kthreads later has shown to avoid the
hanging on systems that could previously reproduce the issue.
Postpone kthread starting until after all arch initcalls have
completed. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix uninitialised clock rate
For legacy 32-bit Tegra devices, the warning in the
tegra_pmc_enter_suspend_mode() function is being triggered because the
early_pmc->rate variable is never configured and hence, always 0. This
issue started occurring after updating the PMC driver to create the PMC
context dynamically which causes the 'rate' to be set in the new dynamic
context, but missed updating the rate in the early PMC context.
Fix this by initialising the early_pmc->rate variable for 32-bit Tegra
devices when the rate for the PMC context is initialised.
[treding@nvidia.com: move assignment to existing #ifdef block] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
The devres conversion replaced manual pm_runtime_enable()/disable() with
devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime
PM teardown. The managed release tears runtime PM down in the wrong
order: it calls pm_runtime_dont_use_autosuspend() before
pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres
is LIFO so the devm_clk_get_enabled() release runs afterwards.
At remove(), pm_runtime_put_sync() leaves the device active with the
autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle()
suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the
clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s
the already-disabled clock, so clk_core_disable() WARNs ("clkN already
disabled") on every teardown.
Drop the managed helper and restore the non-managed runtime PM setup and
teardown, so runtime PM is enabled once in probe and disabled once in
remove and the clock enable count stays balanced.
Order the remove teardown so runtime PM is disabled before the usage
count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle()
instead of pm_runtime_put_sync(). Dropping the count first with autosuspend
still enabled arms the autosuspend timer, and a preemption before
pm_runtime_disable() lets it expire, suspend the device and clk_disable()
the clock, which the devm release then disables again - the same WARN.
Restore the non-managed IRQ request as well. The probe error paths now
unwind runtime PM by hand via goto, and a devm-registered handler is only
freed later during devres unwind, so it would stay live across the manual
teardown (and across any future failing step added after it). Request the
IRQ with request_threaded_irq() and free it explicitly in the probe error
path and in remove. The probe error path also clears use_autosuspend, to
match the teardown in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Avoid infinite retry loop in init_vp_index()
There is a retry loop in init_vp_index() where the CPUs from a certain
node are stripped out if they have already been in the allocated cpumask
or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no
CPU left, the allocated cpumask is ignored and the process is retried
again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns
out not to contain any CPU in that particular node, that will become an
infinite retry loop. This particular problem was reported by sashiko
[1]. This should rarely happen, but we still need to guard against this.
Fix this infinite loop problem by also skipping NUMA node that has no
housekeeping CPU in the inner while loop of init_vp_index(). Also update
the early abort check to check for the absence of online housekeeping
CPUs instead of just the emptiness of the cpumask. As the outer for
loop will only be reached if the housekeeping cpumask has at least one
online CPU, a NUMA node with housekeeping CPUs will eventually be found. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote attacker to cause a denial of service using a specially crafted regular expression that would cause excessive resource consumption. |
| IBM Concert 1.0.0 through 3.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| IBM Concert 1.0.0 through 3.0.0 could allow a local attacker to obtain sensitive information due to recursive copying of build context directories into container images. |
| IBM Concert 1.0.0 through 3.0.0 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote authenticated attacker to cause a denial of service due to improper enforcement of storage limits. |
