Export limit exceeded: 421036 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1260 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74515 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device. | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-68407 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error. | ||||
| CVE-2026-68333 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-68231 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clear_bit label, which already drains s->queued_bufs via vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68223 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: Fix memory leak in error path of vdec_open The vdec_open() function previously jumped directly to err_m2m_release when vdec_init_ctrls() failed, skipping release of the m2m context. This caused a resource leak. Fix it by introducing a proper err_m2m_ctx_release label that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before releasing the m2m device. This was identified via kmemleak: unreferenced object 0xffff0000205d6878 (size 8): comm "v4l_id", pid 5289, jiffies 4294938580 hex dump (first 8 bytes): 40 d2 49 18 00 00 ff ff @.I..... backtrace (crc d3204599): kmemleak_alloc+0xc8/0xf0 __kvmalloc_node_noprof+0x60c/0x850 v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev] vdec_open+0x1f4/0x788 [meson_vdec] v4l2_open+0x144/0x460 [videodev] chrdev_open+0x1ac/0x500 do_dentry_open+0x3f0/0xfe8 vfs_open+0x68/0x320 do_open+0x2d8/0x9a8 path_openat+0x1d0/0x4f0 do_filp_open+0x190/0x380 do_sys_openat2+0xf8/0x1b0 __arm64_sys_openat+0x13c/0x1e8 invoke_syscall+0xdc/0x268 el0_svc_common.constprop.0+0x178/0x258 do_el0_svc+0x4c/0x70 | ||||
| CVE-2026-68222 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptible() was interrupted - msi2500_set_usb_adc() failure: ret was silently overwritten by the next call (msi2500_isoc_init), so the error was lost entirely - msi2500_isoc_init() failure: cleanup_queued_bufs was called, but the function then fell through to msi2500_ctrl_msg() and again masked the original error by overwriting ret - msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all, leaving isoc URBs submitted with no way for the driver to consume them Consolidate the error paths into a small goto chain. Every failure now stops the function, drains the queued-buffer list, and returns the real error code. The ctrl_msg failure path also rolls back the preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before unlocking and draining. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68215 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls. | ||||
| CVE-2026-68210 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32: dcmi: unregister notifier on probe failure dcmi_graph_init() registers the async notifier before dcmi_probe() toggles the reset line. If reset_control_assert() or reset_control_deassert() fails afterwards, probe returns through err_cleanup and the driver core will not call dcmi_remove(). Unregister the notifier before cleaning it up on that error path, matching the successful remove path and the V4L2 async notifier lifetime rules. [hverkuil: added Fixes tag] | ||||
| CVE-2026-68209 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. sun4i_csi_start_streaming() returned -EINVAL when no matching CSI format could be found, before any setup (scratch buffer allocation, pipeline start) had been performed. The remaining error paths already converge on the err_clear_dma_queue label, which calls return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump to that label directly: the intermediate err_disable_device / err_disable_pipeline / err_free_scratch_buffer labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68207 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: unwind v4l2 device registration on probe error If the vpe_top resource is missing, vpe_probe() returns -ENODEV after v4l2_device_register() has succeeded. Probe failures do not call the driver's remove callback, so the v4l2 device remains registered on that error path. Route that failure through the existing v4l2_device_unregister() unwind label, matching the other errors after v4l2_device_register(). | ||||
| CVE-2026-68183 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups. | ||||
| CVE-2026-68151 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERP from a switch nested in the scan loop, so its break leaves the switch and not the loop. A binary carrying more than one PT_INTERP runs the case again and overwrites both interpreter_name and interpreter. The previous name allocation leaks and so does the previous interpreter reference, along with the write denial open_exec() took on it. The denial is never released, so the file stays unwritable for as long as the system runs. An unprivileged caller reaches this with a crafted binary and repeats it at will. binfmt_elf stops at the first PT_INTERP. Do the same here. The flaw dates back to the driver's introduction in the pre-git history tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF binary format driver"). | ||||
| CVE-2026-68135 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-21714 | 1 Nodejs | 2 Node.js, Nodejs | 2026-08-19 | 5.3 Medium |
| A memory leak occurs in Node.js HTTP/2 servers when a client sends WINDOW_UPDATE frames on stream 0 (connection-level) that cause the flow control window to exceed the maximum value of 2³¹-1. The server correctly sends a GOAWAY frame, but the Http2Session object is never cleaned up. This vulnerability affects HTTP2 users on Node.js 20, 22, 24 and 25. | ||||
| CVE-2026-72271 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: i740fb: fix potential memory leak in i740fb_probe() In i740fb_probe(), the memory allocated in fb_videomode_to_modelist() for modelist is not freed in the error paths. Fix that by calling fb_destroy_modelist(). | ||||
| CVE-2026-72376 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix misplaced inc of net->cells_outstanding Fix net->cells_outstanding being incremented before the check for failure of idr_alloc_cyclic(), leaving the count incremented on error. | ||||
| CVE-2026-72167 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: pl353: fix probe resource allocation During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent. | ||||
| CVE-2026-72264 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: tridentfb: fix potential memory leak in trident_pci_probe() In trident_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist(). | ||||