| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The poplib module, when passed a user-controlled command, can have
additional commands injected using newlines. Mitigation rejects commands
containing control characters. |
| AuntyFey Smart Combination Lock firmware versions as of 2025-12-24 contain a vulnerability that allows an unauthenticated attacker within Bluetooth Low Energy (BLE) range to cause a denial of service by repeatedly initiating BLE connections. Sustained connection attempts interrupt keypad authentication input and repeatedly force the device into lockout states, preventing legitimate users from unlocking the device. |
| A vulnerability has been found in BDCOM Behavior Management and Auditing System up to 20250210 and classified as critical. Affected by this vulnerability is the function log_operate_clear of the file /webui/modules/log/operate.mds. The manipulation of the argument start_code leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Missing reference to active allocated resource for some Intel(R) Xeon(R) processors may allow an authenticated user to potentially enable denial of service via local access. |
| An attacker with access to a minion key can exploit the 'on demand' pillar functionality with a specially crafted git url which could cause and arbitrary command to be run on the master with the same privileges as the master process. |
| Application does not limit the number or frequency of user interactions, such as the number of incoming requests. At the "/EPMUI/VfManager.asmx/ChangePassword" endpoint it is possible to perform a brute force attack on the current password in use.
This issue affects CyberArk Endpoint Privilege Manager in SaaS version 24.7.1. The status of other versions is unknown. After multiple attempts to contact the vendor we did not receive any answer. |
| A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover. |
| A vulnerability has been found in Oiwtech OIW-2431APGN-HP 2.5.3-B20131128 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formScript of the component Personal Script Submenu. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite.
Affected Products:
UniFi Connect EV Station Lite (Version 1.5.1 and earlier)
Mitigation:
Update UniFi Connect EV Station Lite to Version 1.5.2 or later |
| # Active Storage allowed transformation methods potentially unsafe
Active Storage attempts to prevent the use of potentially unsafe image
transformation methods and parameters by default.
The default allowed list contains three methods allow for the circumvention
of the safe defaults which enables potential command injection
vulnerabilities in cases where arbitrary user supplied input is accepted as
valid transformation methods or parameters.
Impact
------
This vulnerability impacts applications that use Active Storage with the image_processing processing gem in addition to mini_magick as the image processor.
Vulnerable code will look something similar to this:
```
<%= image_tag blob.variant(params[:t] => params[:v]) %>
```
Where the transformation method or its arguments are untrusted arbitrary input.
All users running an affected release should either upgrade or use one of the workarounds immediately.
Workarounds
-----------
Consuming user supplied input for image transformation methods or their parameters is unsupported behavior and should be considered dangerous.
Strict validation of user supplied methods and parameters should be performed
as well as having a strong [ImageMagick security
policy](https://imagemagick.org/script/security-policy.php) deployed.
Credits
-------
Thank you [lio346](https://hackerone.com/lio346) for reporting this! |
| Allocation of resources without limits or throttling issue exists in HMI ViewJet C-more series and HMI GC-A2 series, which may allow a remote unauthenticated attacker to cause a denial-of-service (DoS) condition. |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| A vulnerability in the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to induce a Denial-of-Service (DoS) condition on the device via multiple crafted HTTP requests. In the worst case, a full power cycle is needed to regain control of the device. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| A command injection vulnerability exists in the Infinxt iEdge 100 2.1.32 in the Troubleshoot module "MTR" functionality. The vulnerability is due to improper validation of user-supplied input in the mtrIp parameter. An attacker can exploit this flaw to execute arbitrary operating system commands on the underlying system with the same privileges as the web application process. |
| A vulnerability, which was classified as critical, has been found in Aishida Call Center System up to 20250314. This issue affects some unknown processing of the file /doscall/weixin/open/amr2mp3. The manipulation of the argument File leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Legrand SMS PowerView 1.x and classified as critical. Affected by this vulnerability is an unknown functionality. The manipulation of the argument redirect leads to os command injection. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router's usage of Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. This could lead to excessive resource consumption and denial of service. Apollo Router's usage of Apollo Compiler has been updated so that validation logic processes each named fragment only once, preventing redundant traversal. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| CUBA Platform is a high level framework for enterprise applications development. Prior to version 7.2.23, the local file storage implementation does not restrict the size of uploaded files. An attacker could exploit this by uploading excessively large files, potentially causing the server to run out of space and return HTTP 500 error, resulting in a denial of service. This issue has been patched in version 7.2.23. A workaround is provided on the Jmix documentation website. |
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
