| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-QUIC (DoQ) server can be driven into unbounded goroutine and memory growth by a remote client that opens many QUIC streams and sends only 1 byte per stream. When the worker pool is full, CoreDNS still spawns a goroutine per accepted stream to wait for a worker token. Additionally, active workers block indefinitely in io.ReadFull() with no per-stream read deadline, allowing an attacker to pin all workers by sending a single byte so the read blocks waiting for the second byte of the DoQ length prefix. This enables an unauthenticated remote attacker to cause memory exhaustion and OOM-kill. This issue has been fixed in version 1.14.3. No known workarounds exist. |
| A security vulnerability has been detected in GPAC up to 26.02.0. This affects the function sidx_box_read of the file src/isomedia/box_code_base.c. The manipulation leads to allocation of resources. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The identifier of the patch is 442e2299530138d8f874fd885c565ba98a6318ba. It is suggested to install a patch to address this issue. |
| HCL BigFix RunBookAI is affected by a Unvalidated Command Input / Potential Command Smuggling vulnerability. A flaw in a component's input handling was identified that could permit unauthorized command execution. |
| Regex Denial of Service in youtube-regex npm package through version 1.0.5. |
| Improperly controlled modification of Dynamically-Determined object attributes, Allocation of resources without limits or throttling vulnerability in DivvyDrive Information Technologies Inc. DivvyDrive allows Excessive Allocation, Flooding.
This issue affects DivvyDrive: from 4.8.2.19 before 4.8.3.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Handle DBC deactivation if the owner went away
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away. |
| Incus is a system container and virtual machine manager. Prior to version 7.0.0, user provided image and backup tarballs would be unpacked and YAML files parsed without any size restrictions. This was making it easy for an authenticated user to provide a crafted image or backup tarball that when parsed by Incus would lead to a very large YAML document being loaded into memory, potentially causing the entire server to run out of memory. This issue has been patched in version 7.0.0. |
| Incus is a system container and virtual machine manager. Prior to version 7.0.0, uploads of large amount of data by authenticated users can run the Incus server out of disk space, potentially taking down the host system. The impact here is limited for anyone using storage.images_volume and storage.backups_volume as those users will have large uploads be stored on those volumes rather than directly on the host filesystem. This is the default behavior on IncusOS. This issue has been patched in version 7.0.0. |
| Uncontrolled resource consumption in .NET allows an unauthorized attacker to deny service over a network. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch(). |
| A security vulnerability has been detected in Wavlink WL-WN570HA1 R70HA1 V1410_221110. Impacted is the function set_sys_cmd of the file /cgi-bin/adm.cgi. Such manipulation of the argument command leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Wavlink WL-WN570HA1 R70HA1 V1410_221110. The affected element is the function ping_ddns of the file /cgi-bin/adm.cgi. Performing a manipulation of the argument DDNS results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer. |
| A weakness has been identified in Wavlink WL-WN570HA1 R70HA1 V1410_221110. This issue affects the function set_sys_adm of the file /cgi-bin/adm.cgi. This manipulation of the argument Username causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer. |
| An issue was discovered in MM in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, W920, W930, W1000, Modem 5123, and Modem 5300. Incorrect handling of 5G NR NAS registration accept messages leads to a Denial of Service. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid memory leak in f2fs_rename()
syzbot reported a f2fs bug as below:
BUG: memory leak
unreferenced object 0xffff888127f70830 (size 16):
comm "syz.0.23", pid 6144, jiffies 4294943712
hex dump (first 16 bytes):
3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9..
backtrace (crc 925f8a80):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4520 [inline]
slab_alloc_node mm/slub.c:4844 [inline]
__do_kmalloc_node mm/slub.c:5237 [inline]
__kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250
kmalloc_noprof include/linux/slab.h:954 [inline]
fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364
f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143
f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961
f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308
vfs_rename+0x7ff/0x1250 fs/namei.c:6026
filename_renameat2+0x4f4/0x660 fs/namei.c:6144
__do_sys_renameat2 fs/namei.c:6173 [inline]
__se_sys_renameat2 fs/namei.c:6168 [inline]
__x64_sys_renameat2+0x59/0x80 fs/namei.c:6168
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux
label during whiteout initialization"), we added a call to
f2fs_setup_filename() without a matching call to f2fs_free_filename(),
fix it. |
| A flaw has been found in TRENDnet TEW-821DAP up to 1.12B01. The impacted element is the function tools_diagnostic of the file /tmp/diagnostic of the component Firmware Udpate. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer. |
