| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw in Node.js TLS host verification can cause an attacker to bypass certification validation.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.8.0, the Node.js compatibility TCP path checked the permission against the original hostname string before resolution and then did not re-check after resolution. A caller could therefore pass a numeric alias of an IP address (for example the decimal integer 2130706433 or the hex form 0x7f000001, both of which resolve to 127.0.0.1) and reach the denied destination through node:net.connect or node:http.request's { host, port } options form. This vulnerability is fixed in 2.8.0. |
| Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch. |
| TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected. |
| When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: don't kill URBs in interrupt context
Serialization for the TX path was enforced by calling
usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before
a previous URB was completed. usb_tx_block() can be called from
interrupt context (e.g. in the HCD giveback path), so we can't always
use it to kill in-flight URBs.
Prevent sleeping during interrupt context by checking the tx_submitted
anchor for existing URBs. We now return -EBUSY, to indicate there's
a pending request. |
| Parsing a WEBP image with an invalid, large size panics on 32-bit platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix abuse of kprobe_write_ctx via freplace
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Switch CONFIG_CFI_CLANG to CONFIG_CFI
This was renamed in commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG
to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong
name results in the code getting compiled out. Meaning the CFI failures
for btf_dtor_kfunc_t would still trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: zero the whole vnet header in tun_put_user()
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration. |
| An unauthorized user can modify configuration through API
calls that affects the OpenText Access
Manager. This issue affects Access Manager before 5.1.3. |
| vLLM versions >= 0.10.2 and < 0.13.0 are missing sparse tensor validation in multimodal embeddings processing. Because PyTorch disables sparse tensor invariant checks by default, an attacker can submit crafted embedding requests with malformed (negative or out-of-bounds) tensor indices, when the prompt-embeds feature is enabled, to trigger crashes or resource exhaustion (denial of service), with potential for out-of-bounds/write-what-where memory corruption. This continues CVE-2025-62164, whose prior fix only disabled the feature by default rather than addressing the root cause. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clear current gateway during teardown
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown. |
| Dreamweaver Desktop versions 21.7 and earlier are affected by an Improper Access Control vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. |
| IBM Langflow OSS 1.0.0 through 1.8.4 could allow unauthenticated attackers to access protected MCP project resources and execute MCP operations due to improper authorization enforcement in the Streamable MCP transport endpoint. |
| Execution with unnecessary privileges in Azure Synapse allows an authorized attacker to elevate privileges over a network. |
| The GridTime 3000 GNSS Time Server leaks the access token in the URL parameters of some endpoints.
This issue affects GridTime 3000: from 1.0r0.03 through 1.1r0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop tp_meter sessions during mesh teardown
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: ensure our nlmsg responses are initialised
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from
DEVCORE Research Team working with Trend Micro Zero Day Initiative
report that a RTM_GETNEIGH will return uninitalised data in the pad
bytes of the ndmsg data.
Ensure we're initialising the netlink data to zero, in the link, addr
and neigh response messages. |
