| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Slider and Carousel slider by Depicter plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the uploadFile function in all versions up to, and including, 3.1.1. This makes it possible for authenticated attackers, with contributor access or higher, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| A remote, unauthenticated privilege escalation in ibi WebFOCUS allows an attacker to gain administrative access to the application which may lead to unauthenticated Remote Code Execution |
| Inclusion of Functionality from Untrusted Control Sphere(CWE-829) in the Command Centre Server and Workstations may allow an attacker to perform Remote Code Execution (RCE).
This issue affects: Command Centre Server and Command Centre Workstations 9.10 prior to vEL9.10.1530 (MR2), 9.00 prior to vEL9.00.2168 (MR4), 8.90 prior to vEL8.90.2155 (MR5), 8.80 prior to vEL8.80.1938 (MR6), all versions of 8.70 and prior. |
| There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701.
Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities.
Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect this vulnerability to have a safety impact. The attack can be automated (AU:Y). |
| Authenticated command injection in the filename of a <redacted>.exe request leads to remote code execution as the root user.
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services.
CVSS clarification: This attack can be performed over any network conenction serving the web interfacr (AV:N), and there are not additional mitigating measures that need to be circumvented (AC:L) or other prerequisites (AT:N). The attack does require privileges, but the level does not matter (PR:L), there is no user interaction required (UI:N). The attack leeds to a full compromised of the charger (VC:H/VI:H/VA:H) and a compromised charger can be used to "pivot" to networks that should normally not be reachable (SC:L/SI:L/SA:H). Because this is an EV chargers with significant pwoer, there is a potential safety imp0act (S:P). THis attack can be automated (AU:Y). |
| Command injection in the <redacted> parameter of a <redacted>.exe request leads to remote code execution as the root user.
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). If is a full system compromise, potentially fully compromising confidentiality, integrity and availability of the devicer (VC:H/VI:H/VA:H). A compromised charger can be used to "pivot" onto networks that should otherwise be closed, cause a low confidentiality and interity impact on subsequent systems. (SC:L/SI:L/SA:H). Because this device is an EV charger handing significant amounts of power, we suspect this vulnerability can have a safety impact (S:P). The attack can be automated (AU:Y). |
| ComfyUI-Impact-Pack is vulnerable to Path Traversal. The issue stems from missing validation of the `image.filename` field in a POST request sent to the `/upload/temp` endpoint added by the extension to the server. This results in writing arbitrary files to the file system which may, under some conditions, result in remote code execution (RCE). |
| Snyk has identified a remote code execution (RCE) vulnerability in all versions of Code Agent. The vulnerability enables an attacker to execute arbitrary code within the Code Agent container. Exploiting this vulnerability would require an attacker to have network access to the Code Agent within the deployment environment. External exploitation of this vulnerability is unlikely and depends on both misconfigurations of the cluster and/or chaining with another vulnerability. However, internal exploitation (with a cluster misconfiguration) could still be possible. |
| The issue stems from a missing validation of the pip field in a POST request sent to the /customnode/install endpoint used to install custom nodes which is added to the server by the extension. This allows an attacker to craft a request that triggers a pip install on a user controlled package or URL, resulting in remote code execution (RCE) on the server. |
| Versions of the package unisharp/laravel-filemanager before 2.9.1 are vulnerable to Remote Code Execution (RCE) through using a valid mimetype and inserting the . character after the php file extension. This allows the attacker to execute malicious code. |
| An arbitrary file upload vulnerability was reported in the Lenovo Scanner Pro client during an internal security assessment that could allow remote code execution or unauthorized control of the affected system. |
| All versions of the package jsonpath-plus are vulnerable to Remote Code Execution (RCE) due to improper input sanitization. An attacker can execute aribitrary code on the system by exploiting the unsafe default usage of vm in Node.
**Note:**
There were several attempts to fix it in versions [10.0.0-10.1.0](https://github.com/JSONPath-Plus/JSONPath/compare/v9.0.0...v10.1.0) but it could still be exploited using [different payloads](https://github.com/JSONPath-Plus/JSONPath/issues/226). |
| The Crawlomatic Multipage Scraper Post Generator plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the crawlomatic_generate_featured_image() function in all versions up to, and including, 2.6.8.1. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| Versions of the package mysql2 before 3.9.4 are vulnerable to Remote Code Execution (RCE) via the readCodeFor function due to improper validation of the supportBigNumbers and bigNumberStrings values. |
| An authenticated Remote Code Execution (RCE) vulnerability exists in the AirWave CLI. Successful exploitation of this vulnerability could allow a remote authenticated threat actor to run arbitrary commands as a privileged user on the underlying host. |
| The Data Tables Generator by Supsystic plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the cleanCache() function in all versions up to, and including, 1.10.45. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| Hitron CGNF-TWN 3.1.1.43-TWN-pre3 contains a command injection vulnerability in the telnet service. The issue arises due to improper input validation within the telnet command handling mechanism. An attacker can exploit this vulnerability by injecting arbitrary commands through the telnet interface when prompted for inputs or commands. Successful exploitation could lead to remote code execution (RCE) under the privileges of the telnet user, potentially allowing unauthorized access to system settings and sensitive information. |
| CVE-2024-4320 describes a vulnerability in the parisneo/lollms software, specifically within the `ExtensionBuilder().build_extension()` function. The vulnerability arises from the `/mount_extension` endpoint, where a path traversal issue allows attackers to navigate beyond the intended directory structure. This is facilitated by the `data.category` and `data.folder` parameters accepting empty strings (`""`), which, due to inadequate input sanitization, can lead to the construction of a `package_path` that points to the root directory. Consequently, if an attacker can create a `config.yaml` file in a controllable path, this path can be appended to the `extensions` list and trigger the execution of `__init__.py` in the current directory, leading to remote code execution. The vulnerability affects versions up to 5.9.0, and has been addressed in version 9.8. |
| A JNDI injection issue was discovered in Cloudera JDBC Connector for Hive before 2.6.26 and JDBC Connector for Impala before 2.6.35. Attackers can inject malicious parameters into the JDBC URL, triggering JNDI injection during the process when the JDBC Driver uses this URL to connect to the database. This could lead to remote code execution. JNDI injection is possible via the JDBC connection property krbJAASFile for the Java Authentication and Authorization Service (JAAS). Using untrusted parameters in the krbJAASFile and/or remote host can trigger JNDI injection in the JDBC URL through the krbJAASFile. |
| The Woody code snippets – Insert Header Footer Code, AdSense Ads plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.5.0 via the 'insert_php' shortcode. This is due to the plugin not restricting the usage of the functionality to high level authorized users. This makes it possible for authenticated attackers, with contributor-level access and above, to execute code on the server. |
