| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap buffer overflow vulnerability in the loading of ExecuTorch models can potentially result in code execution or other undesirable effects. This issue affects ExecuTorch prior to commit ede82493dae6d2d43f8c424e7be4721abe5242be |
| llama.cpp is an inference of several LLM models in C/C++. Integer Overflow in the gguf_init_from_file_impl function in ggml/src/gguf.cpp can lead to Heap Out-of-Bounds Read/Write. This vulnerability is fixed in commit 26a48ad699d50b6268900062661bd22f3e792579. |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. |
| Vim is an improved version of the unix vi text editor. When flushing the typeahead buffer, Vim moves the current position in the typeahead buffer but does not check whether there is enough space left in the buffer to handle the next characters. So this may lead to the tb_off position within the typebuf variable to point outside of the valid buffer size, which can then later lead to a heap-buffer overflow in e.g. ins_typebuf(). Therefore, when flushing the typeahead buffer, check if there is enough space left before advancing the off position. If not, fall back to flush current typebuf contents. It's not quite clear yet, what can lead to this situation. It seems to happen when error messages occur (which will cause Vim to flush the typeahead buffer) in comnination with several long mappgins and so it may eventually move the off position out of a valid buffer size. Impact is low since it is not easily reproducible and requires to have several mappings active and run into some error condition. But when this happens, this will cause a crash. The issue has been fixed as of Vim patch v9.1.0697. Users are advised to upgrade. There are no known workarounds for this issue. |
| A Heap buffer overflow in the server-site handshake implementation in Real Time Logic SharkSSL from 09/09/24 and earlier allows a remote attacker to trigger a Denial-of-Service via a malformed TLS Client Key Exchange message. |
| A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2501.0001), Opcenter Intelligence (All versions < V2501.0001), Opcenter Quality (All versions < V2512), Opcenter RDnL (All versions < V2410), SIMATIC PCS neo V4.0 (All versions), SIMATIC PCS neo V4.1 (All versions < V4.1 Update 3), SIMATIC PCS neo V5.0 (All versions < V5.0 Update 1), SINEC NMS (All versions if operated in conjunction with UMC < V2.15), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions), Totally Integrated Automation Portal (TIA Portal) V18 (All versions), Totally Integrated Automation Portal (TIA Portal) V19 (All versions). Affected products contain a heap-based buffer overflow vulnerability in the integrated UMC component.
This could allow an unauthenticated remote attacker to execute arbitrary code. |
| RedisTimeSeries is a time-series database (TSDB) module for Redis, by Redis. Executing one of these commands TS.QUERYINDEX, TS.MGET, TS.MRAGE, TS.MREVRANGE by an authenticated user, using specially crafted command arguments may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. This vulnerability is fixed in 1.6.20, 1.8.15, 1.10.15, and 1.12.3. |
| For Realtek AmebaD devices, a heap-based buffer overflow was discovered in Ameba-AIoT ameba-arduino-d before version 3.1.9 and ameba-rtos-d before commit c2bfd8216a1cbc19ad2ab5f48f372ecea756d67a on 2025/07/03. In the WLAN driver defragment function, lack of validation of the size of fragmented Wi-Fi frames may lead to a heap-based buffer overflow. |
| NeKernal is a free and open-source operating system stack. Version 0.0.2 has a 1-byte heap overflow in `rt_copy_memory`, which unconditionally wrote a null terminator at `dst[len]`. When `len` equals the size of the destination buffer (256 bytes), that extra `'\0'` write overruns the buffer by one byte. To avoid breaking existing callers or changing the public API, the patch in commit fb7b7f658327f659c6a6da1af151cb389c2ca4ee takes a minimal approach: it simply removes the overflow-causing line without adding bounds checks or altering the function signature. |
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption.
This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. |
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. |
| HarfBuzz is a text shaping engine. Starting with 8.5.0 through 10.0.1, there is a heap-based buffer overflow in the hb_cairo_glyphs_from_buffer function. |
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. |
| Missing protection mechanism for alternate hardware interface in the Intel(R) Quick Assist Technology for some Intel(R) Platforms within Ring 0: Kernel may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The product implements access controls via a policy or other feature with the intention to disable or restrict accesses (reads and/or writes) to assets in a system from untrusted agents. However, implemented access controls lack required granularity, which renders the control policy too broad because it allows accesses from unauthorized agents to the security-sensitive assets. (CWE-1220)
Hitachi Vantara Pentaho Business Analytics Server versions before 10.2.0.0 and 9.3.0.9, including 8.3.x, do not correctly perform an authorization check in the user console trash content
An attacker exploits a weakness in the configuration of access controls and is able to bypass the intended protection that these measures guard against and thereby obtain unauthorized access to the system or network. |
| It is possible to crash or redirect the execution flow of the ClickHouse server process from an unauthenticated vector by sending a specially crafted request to the ClickHouse server native interface. This redirection is limited to what is available within a 256-byte range of memory at the time of execution, and no known remote code execution (RCE) code has been produced or exploited.
Fixes have been merged to all currently supported version of ClickHouse. If you are maintaining your own forked version of ClickHouse or using an older version and cannot upgrade, the fix for this vulnerability can be found in this commit https://github.com/ClickHouse/ClickHouse/pull/64024 . |
| A heap buffer overflow vulnerability has been identified in thesmooth2() in cmsgamma.c in lcms2-2.16 which allows a remote attacker to cause a denial of service. NOTE: the Supplier disputes this because "this is not exploitable as this function is never called on normal color management, is there only as a helper for low-level programming and investigation." |
| A heap buffer overflow vulnerability has been identified in the lcms2-2.16. The vulnerability exists in the UnrollChunkyBytes function in cmspack.c, which is responsible for handling color space transformations. NOTE: this is disputed by the Supplier because the finding identified a bug in a third-party calling program, not in lcms. |
| A heap buffer overflow vulnerability in FFmpeg before commit 4bf784c allows attackers to trigger a memory corruption via supplying a crafted media file in avformat when processing tile grid group streams. This can lead to a Denial of Service (DoS). |
| Insufficient granularity of access control in the OOB-MSM for some Intel(R) Xeon(R) 6 Scalable processors may allow a privileged user to potentially enable escalation of privilege via adjacent access. |
